sharingan
-
Content Count
228 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by sharingan
-
-
Can someone confirm that the gearbox of 417 is exactly the same as 416?
-
which parts (brand) would you recommend for a 400fps build?
-
lockup is also when the trigger is blocked -> is not moving a single milimeter -> look like that the gun is in safe modus
-
so you mean that the bolt lock is normal that it is really stiff to push? my gun is brand new and never opened. I am already using 7,4V Lipo
-
Today I took my brand new hk416 into the fields. Range is almost 40meter with 0.25...I have experienced that the trigger is blocked once.in SEMI mode I have to switch from safe to fullauto..In addition the bolt release is not smooth -> I have to use little force and you can hear a "click"
Does some have this issue?
-
I upgraded mainly because the R-hop works better with higher FPS(and full auto limit is 400 fps here), the gun actually has much better range and accuarcy now, and I only had small problems which are easy to fix once you figure it out(I also removed the bars under the stock pipe and rewired it, gives much better efficency). The bolt catch problem was that the upper lever(thats pushed up by the mags lever) can become loose(moves away from the gearbox) regardless how much you twisted in the screw on the lower lever. You can fix it by either putting a few tapes on the inside of the lower receiver where the lever is positioned so it pushes it back to the gearbox, or in my case(because I didn't want to take out the gearbox again) you can put something(2 small shrinktube in my example) on the lever where it connects with the magazine's lever. Honestly I don't know why it become loose over time, my SCAR-L didn't have that problem and even that was taken apart for maintenance.
Also I said I had problem with even the original selector plate, but I just realized sometimes semi locks up if I go from full auto and the cycle wasn't finished properly. This is most likely because the more powerful motor if the BTC mosfet comes out it should fix it.
However if you live somewhere where the FPS limits are around 1J then yeah you shouldn't take it apart(the barrel and the hop-up maybe). It is a really good stock gun. I just like meddle with my guns.
Do you have some picture of your shrinktube fix?? Yeah we have also a 400fps full auto here but I am not sure if I take the gun apart.
I used 7.4v 25c lipo. Changed spring that gives around 360fps.
Sent from my GT-I9300 using Tapatalk
Did you only remove the stocktube and replaced the spring and no other parts are replaced? Is the Spring connected/hock up with the Pistonhead like the "old" TM System?
-
Have you opened it up ?
No, because I don`t have it yet because it`s out of stock. I just gather information of common problems and how to fix it before I am 100% sure that I purchase it
-
Does someone else has troubles with the bolt lock doesn`t work? I know Zereck has this problem.
-
What is the effective range of a stock TM HK416? I mean what is the maximum range where you hit a torso target easily? Is 50meters possible?
-
That looks like a Hurricane kit?
Because of the grip? Yes the grip are from Hurricane Kit..I only bought the slide and frame second hand.
Here are more picture of the seller
http://egun.at/market/uploaded/4098826_5139f12e8650f.jpg
-
1
-
-
Well something new from my side.
Bought this Kit second hand and it came already with ceracote paint. Seller stated it as a NOVA Kit but I am not sure but it comes with nova typical packing.
Well something is bothering me: The blowbackunit is held by a screw and a metalbar (firing pin). I have to use the metalbar of a 1911A1 and not MEU. The Rearsight is not compatlble with TM sights (I wanted to resue my tm night warrior sights). The Hole on the slide for the rearsight is little bit different -> REAL DEAL rearsight spec??
It seams that I need a also a 1911A1 Blowbackunit because there is screw on the rearsight to fix it -> screw do nothing at all -> still wobbling heavy around.
-
@Squad
I fapped so hard....make me want to build a S70 as well
-
2
-
-
I want to ask someone who already opened the gearbox.
how complicated is it to get to the gearbox and open it compared to the standard TM M4 with v2 gearbox? And what about to put them together and work as before.
I am thinking to get a HK416 aswell and to put an m100 or m110 spring inside.
-
My Pro Killers
For the silver one I need a new slide in order to get this gbb working
-
Jonny told me that they want to make Steel Kit's. As far as I remember is a MEU. I was asking Johnny if they also make a SFA V12 and they confirmed it (still don't know if he is joking or mean it seriously). I wrote him a second email for progress information but he didn't replied it
-
omg..where did you get a terminator Lasersight?
-
Based on TM Glock17
Kitlist:
-Shooters Design Shuey Custom Slide
-Airsoft Surgeon Loading Nozzle
-Laylax Dyna Pistonhead
-Shooters Design Hammerspring
-Laylax Hopup bucking
-Laylax/Prometheus 6,03 Innerbarrel
-Action Hammer 8mm Bearing
-Laxlax Strikeface
-Magpull Magazine endcap
-Laylax? Magwell
-Guarder Magazine catch
-
Does somebody know if the shoothing design glock17 hammer spring will fit into the G18c?
-
gosh it's so sexy i gonna fap....does some fitting work needed for perfect and smooth operation? Does Buythegunshop ship international?
-
my inokatsu mk43
-
Hi Guys,
Here is my video preview
-
ok here is my current collection.
Guarder RPK
Guarder AK103
Inokatsu AIMS
Inokatsu AK74
VFC AKSU
[VIDEO REVIEW 1080p HD] Tokyo Marui AA12 "SLEDGE HAMMER" (Shooting Test+Disassembly)
in Rifles (AEG)
Posted
really well done video..thank you very much