yeatzee Posted August 20, 2008 Report Share Posted August 20, 2008 Well i was planning on dissembling my G3 today so i got the manual out (this being my first time dissembling a G3) and followed the guide to properly dissemble my gun. All thats left to do is slide off the lower reciever and im good to go but for what ever reason the dang thing wont slide. It's caught on something and i really would rather not take off every single screw on the gun to get it off.....any help would be a blessing. Thanks (link to what my manual says.....http://www.airsplat.com/Manuals/ERA-CA-TAKTIK-5.jpg) Link to post Share on other sites
Rob15 Posted August 21, 2008 Report Share Posted August 21, 2008 If you've taken the 2 rear and front body pin out there there should be nothing holding it in. It actually sounds like the problem i had with both of my CA SG1s, the fit is so damm tight it requires a hammer and a lot of brute strength to get it off and back on....now thats what i call 'quick take down', thanks CA! ¬_¬ Link to post Share on other sites
yeatzee Posted August 21, 2008 Author Report Share Posted August 21, 2008 Yea i took off the handgaurd pin, the 2 stock pins and the reciever pin. I mean it should be just like my ics mp5 right but the dang thing wont budge. I guess im gonna have to stop worrying about breaking it and just do it lol. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.