mcnuggets Posted April 25, 2005 Report Share Posted April 25, 2005 I came across a picture of a Russian made air machinegun: http://makarov.com/drozd/ http://www.eaacorp.com/diagrams-drozdlg.html It looks absolutely amazing despite its taxi cab appearance. I've been lurking around on this user group forum: http://azure.bbboy.net/straferbbmachinegun...wforum?forum=10 I've seen people do a few modifications to their guns. They were able to paint the yellow color away with Krylon plastic paint. The barrel can be replaced with other airgun barrels. It can be run off of external CO2 or HPA. Also the fact that it uses a solenoid to fire the gun the ROF can be adjusted (up to 900rpm) and it could have full auto capability instead of just burst fire. For airsoft purposes obviously the power needs to be decreased and the caliber needs to be increased to 6mm. An increase in caliber would mean a new barrel, an upgraded magazine and action. I'm thinking though that 4.5mm plastic BB's could be used instead: http://www.wellcoolstuff.com/thestore/prods/16B.html A decrease in power might be achieved with a lower input pressure from a regulated air supply or by modifying the circuit board controlling the solenoid. Thoughts, comments? Link to post Share on other sites
nmcabecadas Posted April 25, 2005 Report Share Posted April 25, 2005 Auto Drozd's are foribiden in the UK. This project cannot be discussed here. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.