cs4440 Posted December 29, 2008 Report Share Posted December 29, 2008 right heres the problem ive got a NCS 1x45 Red Dot with Flip-Up Covers and the trouble is the red dot won't zero in its just stuck on the left side can anybody suggest anything i could do to fix it? Link to post Share on other sites
Guest Posted December 30, 2008 Report Share Posted December 30, 2008 This may sound silly, but are you turning the Windage adjustment in the correct direction? Link to post Share on other sites
cs4440 Posted December 30, 2008 Author Report Share Posted December 30, 2008 This may sound silly, but are you turning the Windage adjustment in the correct direction? yes i am lol but the dot wont actually move no matter what i do Link to post Share on other sites
Grimlock Posted December 31, 2008 Report Share Posted December 31, 2008 Sounds like its been adjusted too far and unscrewed itself off the thread. You might be able to rotate it 90 degrees so the elevation becomes the windage, then use tin foil under the scope to correct the elevation. At least youd have working windage adjustment then. Also it might be worth trying different mounts, I have heard of similar problems being fixed moving from a 2 piece to 1 piece mount. Link to post Share on other sites
bigmackey Posted December 31, 2008 Report Share Posted December 31, 2008 worst case it could be an impurity in the glass that refracts the laser in that case id say send/take it back get a new one and try it Link to post Share on other sites
Blackweell! Posted December 31, 2008 Report Share Posted December 31, 2008 This thread is double posted... Anyways...it's most likely broken Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.