illimar Posted July 2, 2009 Report Share Posted July 2, 2009 I recently upgraded a G&G GR25 and now it is double feeding. Gun has Prometheus Triple Torque gear set Prometheus half tooth piston G&G GR25 original cylinder G&G metal cylinder head G&G spring guide (bearing) G&G metal piston head G&G metal bushings G&G M150 spring Systema hop-up bucking As it seems to me the nozzle is not at starting position at first. I believe it should cover the feeding hole at first and after trigger pull, it should load a BB to hop-up and shoot it on his way. When I insert the mag, one BB already rolls out. Has anyone had this problem before ? Please help ! Link to post Share on other sites
AnotherJesus Posted July 3, 2009 Report Share Posted July 3, 2009 Hop up problem. The nozzle on most AEG's rests in the rear position. It's just to do with the sector gear position, doesn't indicate you've any problem. If you've got a week hop up rubber, old and worn, or incorrectly installed, it might not be holding onto the BB how it should. Try taking it apart and reassembling at first, then if that doesn't work, you probably need a new rubber. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.