Wisey Posted June 2, 2010 Report Share Posted June 2, 2010 I'm sure there's been a discussion about this before, but I can't seem to find it. I've got my friends DE USP and at first it's only firing a BB maybe one in 5 shots. I suspected the hop rubber was stopping the BB's from feeding into the chamber properly. So I took it apart, moved the hop rubber further up the barrel and put it back together. Now it's doing the strangest thing. I fire one shot and it dry fires, the next shot one BB drops on the floor in front of me and another shoots normally - from the same single shot. Any ideas? Cheers! Wisey Link to post Share on other sites
Stealthbomber Posted June 3, 2010 Report Share Posted June 3, 2010 The problem you have now is probably due to the hop-up not stopping BBs from entering the barrel. I had a similar problem to what you were originally describing and it turned out to be that my mag's were a little cloged up with dirt and the feed lips at the top of the mags weren't working properly. If you take a look at the mags, the latch that holds the BBs in the mag is rather delicate. Have a look at the (empty) mags and make sure the latch can move freely ald then fit a mag into the gun and check that the latch is being released so BBs can actually get up into the gun. Link to post Share on other sites
Wisey Posted June 3, 2010 Author Report Share Posted June 3, 2010 Thanks for the reply, but I got up this morning and tested it again, two mags on full auto and she's feeding flawlessly once again. I suspect it just needed the hop rubber moving into place AFTER I took it apart and reassembled it. Thanks though Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.