DamnLion Posted January 12, 2011 Report Share Posted January 12, 2011 This is tentative - testing the waters here. My SCAR was pre-ordered from evike, serial number 43 or 63, I can't remember off the top of my head. This is the AWSS Tan version with brass tube, Version 3 Nozzle, ready for C02. This package comes with: Internal: RA-Tech NPAS with tool (installed) RA-Tech Part #66 (valve locker) and firing pin base (both installed) 6mm steel firing pin (installed) Blowback Armory Forged Steel WE Hammer, Sear, and trigger with lifetime warantee (installed) Second Gen hop-up rubber (the black one, not the ###### green one) Accessories: Replacement Hinge plate (current one has a hairline fracture, but for some reason, will not get any worse) RS Magpul MOE Grip RS Foregrip Eotech 552 Replica (tan) both red and green reticles. works with no issues, no ghosting, and will come with batteries. Replica QD Knights Supressor (tan) comes with storage bag. 2x C02 magazine with NO leaks whatsoever - never have. Speed Loader unjamming rod RC Shock Oil (non-corrosive to the hop-up and mag rubber) for lube Original box, documentation for SCAR, Eotech, MOE grip. will include original nozzle, parts, grips, etc. This gun has been great to me - its substantially upgraded with steel and would make a skirmisher happy. Gun has seen an absolute max of 2k rounds, and never skirmished, always cleaned, lubed and maintained. All in all, the gun cost me over $600 with shipping, etc. : SCAR: $200 Extra mag: $40 Supressor: $30 Eotech: $60 Magpul MOE: $20 Foregrip: $10 RA Tech Upgrades: $100 6mm firing pin: $15 Blowback Armory Trigger/Sear/Hammer set: $108 I'll sell for $400 shipped. as far as trades, theres not much that I'm interested in: - HDTV (no rear-projection) that must be able to be wall-mounted - WE G39K, not the RAS version, and not the C version - If you randomly live within 100 miles of cincinnati ohio and tattoo at a reliable, clean, talented shop. Attached is a picture of the gun with everything attached. its the only one I have right now, but will give more upon request/interest. Thanks, Blake Link to post Share on other sites
DamnLion Posted January 18, 2011 Author Report Share Posted January 18, 2011 UPDATE: The gun needs a new mag catch. (part #108 on WE SCAR diagram) : http://www.ipscgm.com/index.php?main_page=product_info&cPath=399_383&products_id=1995&language=en The mags are currently sitting about 1-2mm too low due to the worn down catch. Link to post Share on other sites
DamnLion Posted January 31, 2011 Author Report Share Posted January 31, 2011 $300 shipped. steal. the parts are worth that alone. store-bought lifetime warrantee on the trigger unit. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.