Jackhamma Posted May 27, 2013 Report Share Posted May 27, 2013 Hello guys, Will the 5.56 type magpul magazine loop fit the KAC PDW's magazine? Link to post Share on other sites
SixtyNiner Posted June 17, 2013 Report Share Posted June 17, 2013 Yes - but they won't be as secure as on a full sized 5.56 mag. Will be okay for handling mags but I think if you are using mag pouches that grip using elastic or rubber the magpuls might come off when tugged. Link to post Share on other sites
FTZ-WildeCard Posted June 18, 2013 Report Share Posted June 18, 2013 Just tried this at home -- and I'd go as far as to say "don't bother". When attempting to fit them normally, the Magpul is so loose I would not be surprised if it fell of on its own (did a shake test -- and it fell off!). When using the alternative fitting method (spin the Magpul 90 degrees to one side so the pull strap goes along the mag longways front to back) it is even worse (the Magpul constricts, but ends up shrinking off the mag), and is far too loose to perform its intended function. Photos to follow...! Link to post Share on other sites
Im going space Posted June 18, 2013 Report Share Posted June 18, 2013 gaffa tape magpuls. sorted. 1) cut strip of tape off (this will be the loop) fold it in half lengthways2) Tape around the mag, taping both ends of the loop on3) tug a bit, reinforce as needed4) ???5) Profit. Link to post Share on other sites
FTZ-WildeCard Posted June 18, 2013 Report Share Posted June 18, 2013 I've uploaded some quick snaps to Arnie's. http://www.arniesairsoft.co.uk/forums/index.php?/gallery/album/2116-kac-pdw-magazines-and-magpuls/ Link to post Share on other sites
Wild_XIII Posted June 18, 2013 Report Share Posted June 18, 2013 gaffa tape magpuls. sorted. 1) cut strip of tape off (this will be the loop) fold it in half lengthways 2) Tape around the mag, taping both ends of the loop on 3) tug a bit, reinforce as needed 4) ??? 5) Profit. This. Sure, it doesn't look so "high speed, low drag" but it works just fine. Link to post Share on other sites
Powerslave Posted June 18, 2013 Report Share Posted June 18, 2013 gaffa tape magpuls. sorted. 1) cut strip of tape off (this will be the loop) fold it in half lengthways 2) Tape around the mag, taping both ends of the loop on 3) tug a bit, reinforce as needed 4) ??? 5) Profit. This. Although I would leave the loop long at the top, if you see what I mean, so that you can double it over and tape it again for durability. This way its not just adhesive holding it on. Hope that makes sense Sent from my HTC One X using Tapatalk 2 Link to post Share on other sites
Im going space Posted June 18, 2013 Report Share Posted June 18, 2013 I get ya, and i do, kinda hard to put into words so here is a crude diagram. Grey = mag Black = loop Red = tape around mags Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.