bankz5152 Posted December 9, 2014 Report Share Posted December 9, 2014 Hey Chaps, Couple questions which I hope someone can help with. First up can anyone measure their PDW for me? Specifically from the front of the magwell (ignoring the rib) to the rear of the upper receiver? Straight please not at an angle. Thanks in advance Secondly if I where to cut an M4 bolt carrier down so I just have the nozzle section/front section then blank off the rear of the upper receiver essentially removing the need for a buffer tube. Would it still work? As in still cycle, still lock back, still fire? Specifically doing this do a WE M4. Im not making a GBBR M4 pistol either so don't worry. Its an idea for a project. Any help thanks Link to post Share on other sites
renegadecow Posted December 10, 2014 Report Share Posted December 10, 2014 On the latter half, essentially yes. Although based on a WA (AGM) Primo made an LR-300 by cutting down the bolt carrier and fabricating a recoil spring assembly in front of it. You'll lose functionality of full auto however unless you're able to bring the auto sear trip forward via a transfer bar like WE does on some guns. Link to post Share on other sites
bankz5152 Posted December 10, 2014 Author Report Share Posted December 10, 2014 Hmmm something to look into then On my phone my spelling will suck Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.