Amano Posted July 20, 2005 Report Share Posted July 20, 2005 Okay guys after an age searching for a new set of sites in the uk i finally shelled out and got some from the US thanks to judgeman, now they have arrived i don't ever want them comming off again - whats the strongest possible way of fixing them to the metal slide of a glock 19 ? amano Link to post Share on other sites
directorcass Posted July 20, 2005 Report Share Posted July 20, 2005 For the front sight I cut the tabs off, filled the hole with thick super glue, and then sanded the bottom smooth. Then I took my dremel tool and drilled a small hole in the center. I then took a small flat top screw and screwed the front site onto the slide-rock solid! Link to post Share on other sites
MeDoPu Posted July 21, 2005 Report Share Posted July 21, 2005 try this: For the last sight use a litlle bit longer screw... should work! Link to post Share on other sites
Hissing_Sid Posted July 21, 2005 Report Share Posted July 21, 2005 Front sight: Tiny drop of super-glue into the hole and then place the sight post. Then mix a tiny drop of araldite epoxy and apply inside the slide to fill up the gap between the "prongs" of the sight post. Rear sight: Push into place. If it gets loose then a tiny strip of sellotape in the dovetail will take up the slack and make it solid. Can't really see the need for screws. Can't see how you'd use a screw to attach the rear sight. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.