visionviper Posted October 28, 2005 Report Share Posted October 28, 2005 I just want you guys to have a look at my list and let me know if there is anything I should change. Upgrades: Guarder Cylinder Enhancement Set for Marui M16A1/M16VN http://www.uncompany.com/pageproductdetails.asp?prodid=6270 Systema M100 (The PDI equivalent would be....?) 9.6v 3600mah Battery (30 amp discharge) Systema Long Torque Motor http://poweredgeusa.com/product.asp?CategoryID=148&ID=2548 Systema Spur Gear Set High Speed http://poweredgeusa.com/product.asp?CategoryID=137&ID=2579 Link to post Share on other sites
multigl Posted October 28, 2005 Report Share Posted October 28, 2005 The motor and gears are way over kill for a 1j spring. Unless you're like me, and just love tinkering with (and frequently breaking) your AEG, you don't need to drop that much cash on a simple upgrade. You'd do fine with: Spring, Bushings, Shims. I might be inclined to put a new spring guide in, but then again, I'm quite nuts. Link to post Share on other sites
Antagon Posted October 28, 2005 Report Share Posted October 28, 2005 Guarder spring, spring guide, and bushings. All you need. Link to post Share on other sites
visionviper Posted October 28, 2005 Author Report Share Posted October 28, 2005 Well, I guess I should tell you what I am going for. I am really shooting for a really high ROF. Hence, the hi speed gears. I may get a spring that would put it just slightly over forum limits, but I don't know yet. Link to post Share on other sites
dudemattbored Posted October 28, 2005 Report Share Posted October 28, 2005 if you want a high rof then go with this http://www.wgcshop.com/pcart/shopper.php?i...cae9b6db907bdaa along with an echigoya or systema high speed motor anda angel 1j spring Link to post Share on other sites
visionviper Posted October 28, 2005 Author Report Share Posted October 28, 2005 I was told earlier to get a systema torque motor, so what should I get? Hi speed or torque? Link to post Share on other sites
nobody Posted October 28, 2005 Report Share Posted October 28, 2005 I was told earlier to get a systema torque motor, so what should I get? Hi speed or torque? <{POST_SNAPBACK}> The way i understand it you need more torque if you have a higher power sprng and so it is harder to pull back. However seeing as you just want a high rof id go for the high speed with stock spring Link to post Share on other sites
visionviper Posted October 28, 2005 Author Report Share Posted October 28, 2005 But that's the thing, I am not going to use the stock spring. I am going to replace it with an M100, or possibly a little bit higher. Link to post Share on other sites
Antagon Posted October 28, 2005 Report Share Posted October 28, 2005 Just use a 9.6v battery and you'll have PLENTY of firepower. Link to post Share on other sites
Praetor Posted October 28, 2005 Report Share Posted October 28, 2005 if you want a really stupid rate of fire put in the phoneix super high cycle gears. they like 100us but are worth it. my mates got a 25-30 rps rate with those gears Link to post Share on other sites
Joaz Posted October 29, 2005 Report Share Posted October 29, 2005 I was told earlier to get a systema torque motor, so what should I get? Hi speed or torque? <{POST_SNAPBACK}> If you want to buy a Systema motor, I suggest torque up or super torque up Systema Motors above High Speed ones, because they spin up more quickly. But stock motor will be fine in most cases and will last longer. Otherwise you can try an Eagle Force 1300 but don't use it together with Systema gears! The best gear set are IMHO Prometheus ones, better than Phoenix in quality, and way better than Systema gears. Link to post Share on other sites
corpral pain Posted October 29, 2005 Report Share Posted October 29, 2005 high torqe with a small spring will destroy ya piston, remember if you go over kill on gears ect the gun will be to fast and bugger itself! Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.