sacairsoftsn00py
-
Content Count
1,344 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by sacairsoftsn00py
-
And I just got my suply of 134a gas too...lol Do want it...just dont need it. After shipping, it'll probably cost half as much as a Marui M4 GBB. It can wait. TM M4 GBB first.
-
More brass showing.
-
In case it has not been mentioned....some brass (inner barrel) showing through the breach....pretty cool IMO. Sent from my iPad using Tapatalk Correction.....it's not the inner barrel. Looking back at the previous photo, it might just be a gold colored adhesive of some sort...or maybe even an actual brass insert of some sort. Either way, the lil bit of brass showing is by design. Edit: Removed the right thumb safety. Left thumb safety clicks into place but does not lock the trigger into safe. What the left thumb safety does now is that it covers the hole that would have b
-
Ehobby asia has them in stock as well. Just placed an order for a couple.... Side note...in case it matters... There are no rubber recoil buffers that the front of the slide slams onto....so that means that the plastic slide may be hitting the metal rail frame of the gun. For those that use higher pressure gas like green gas...it may be worth knowing.
-
Put a bunch of rounds through my breacher yesterday. Tons of range with 134a and .20g bbs. Some of the bbs tend to sail up while others flew straight. It'd probably work best with .23g bbs. At max range. The grouping is still enough to put in all 6 rounds in a car size target.....I'd say that's right around the 120 foot mark. My pins were backing out. I noticed that after maybe putting 40 shells through it. One particular thing to think about. Full charge of 134a supposedly gets up to 50 shots in the trishot mode. That translates to 5 shells which means that if you're rocking th- 1,362 replies
-
- 1
-
-
- Tokyo Marui
- M870
- (and 4 more)
-
Be careful with loctite. If it gets into the plastic casing, you run the risk of making the plastic brittle. Sent from my iPad using Tapatalk
- 1,362 replies
-
- 1
-
-
- Tokyo Marui
- M870
- (and 4 more)
-
No problems with mine. There may be locking pins available for them as an upgrade. Does it go any farther than that? Sent from my iPad using Tapatalk
-
That's from the cut off lever blocking the switch block. It happens. It's normal. Upgrade to a toque motor to reduce occurrence.
-
So after 4-6 months of being charged with 134a gas, my tactical's&s tank expanded. Tank held gas just fine....just that it was tougher to take out. The room it was left with gets lit by the afternoon sun. Typical valley temp in California where temps reach in the 90-100 range over the past 3 months. Emptied the gas out of the tank then proceeded to repair my puffy gas tank using the trusty rubber mallet. Hit it here and there and it's back to popping out of the stock after the release latch gets pressed even when not gassed up. So I guess I'm not storing the tank with a lot of gas.
-
The bolt lock mechanism hooks onto the tappet plate which is spring loaded so there's resistance when you hit the bolt catch. Even with a 7.4v lipo, you may suffer lock ups on semi auto. That too is normal Sent from my iPad using Tapatalk
-
It's normal. Install a Guarder Infinite Torque Motor for improved performance with the stock marui 8.4v sopmod battery. For even better performance, rewire the gun for deans and use a 7.4v lipo. Sent from my iPad using Tapatalk
-
Use the .20g bbs supplied with the breacher. Sent from my iPad using Tapatalk
-
There's also an upgraded valve available which is said to be able to withstand higher pressure gasses.
-
Have you been using green gas/propane?
-
Feel the need...literally. Grip is very comfy to handle. Just shooting at the backyard, I noticed that the spread is pretty good at 50-60 feet. From plinking around using the 6 shot mode, all 6 bbs are capable of hitting within the size of a medium torso. My ball park figure is about 20" spread from that distance. This is using 134a and .20g bbs (187-191 fps) with the shotteh shooting 6 balls a pump. Sent from my iPad using Tapatalk
- 1,362 replies
-
- 1
-
-
- Tokyo Marui
- M870
- (and 4 more)
-
If it's not broken...keep it marui. only time I would replace it without it being damaged would be if I was to do a full upgrade....one time deal....rail...arm...valve...barrel...grip.... I'd just get the gun up and running...make sure everything is okay and then sell it. Keep the nozzle as a spare for your breacher. Another reason why I prefer echigoya is that I'm pretty certain they're not sending me a demo gun. Then again, it doesn't really matter when the gun is a new release (no time for people to finger fudge) the bb poppers. With that in mind, to save some wait time...the marui
-
Know how the nozzle and arm broke? Sent from my iPad using Tapatalk
-
I'm sure it'll be fine so long as you don't drop it. I'm more concerned about the latch on the grip for the breachers gas tank....the piece of metal bar that's held on by two screws. Meh...I'm sure it's all fine. My m&p 9 needs to come in. Echigoya said that both of my stuff already got sent out from Texas...just that their shipping partner has not given them tracking numbers for them so I wasn't updated as to what's going on. Then there's the marui m4 GBBR...that too needs to come out....it probably won't be released til late November ...or December though. Sent from my
-
Good idea on the color coding for bb weights dude. As far as setting dots on the sight, I would use bbs that get me the optimum trajectory and stay on the shot setting allotted for the gun. 3 shot mode for my m870 tactical using .25g bbs....6 shot mode for my m870 breacher using .20g bbs. Should I get a red dot sight for either, I won't have to worry about adjusting or compensating for shots. Currently, my m870 tac gets used with iron sights...they are perfect for it. Not so sure about the breacher. A dot sight or some sort of sights would probably be better than using it
-
Wouldn't allow me to update my previous post. What I wanted to add was that my breacher shoots three bbs on the 3-shot setting and six bbs on the 6-shot setting....as it should. The breacher is a chunker. It's got heft to it as with everything loaded up, nothing feels hollow about the gun. It might just be because the barrel is short, but an attempt to wiggle the outer barrel showed that it barely moved. It feels more solid compared to the bigger brother. Sent from my iPad using Tapatalk Edit: 134a gas at about 75 degree temp (shady/garage temp and not under the sun
- 1,362 replies
-
- 1
-
-
- Tokyo Marui
- M870
- (and 4 more)
-
I'm getting tired of the waiting. It's been 5 days since they told me that they will send me the tracking number once they ship it from Texas. It's been 9 days since my m&p got to Texas....the m870 breacher was delivered to their Texas re-shipper on 8/18. Which would have left them with now a full week to have given me an tracking update. By no means have I been ignored but all this waiting....I could have ordered elsewhere within a weeks span and have gotten all my goodies already. I requested for my stuff to be shipped to me so I receive them by the end of the week. I also told
-
Yeah. Pretty much the only overseas retailer who had not let.me down. I may have to go back to getting everything from them. Redwolf charges an arm and a leg for shipping. Same with airsoftglobal. My last overseas purchase was actually with ehobby when I got my second tm m870. I ended up cancelling my order from echigoya then as they notified me of issues with cali customs. I thought they had things cleared up which is why I went with them. I am keeping mind paypals 45 day time table on filing complaints. I will be requesting for a refund in another week if I dont get my stuff
-
Fawk. The kit to get. I may just get everything else somewhere after this dealing with echigoya. Too bad...they used to be super awesome for the past 4 years ive bought stuff from them. Thanks for sharing that laylax kit dude. Its badass!
-
At this point I just want to get them. Lol....not like I play anyway haha.
-
Ill have to contact them again fory tracking number. Its been 5+ days since it cleared customs and sent to texas.