oldgamefreak

@ brainexploder If you have T's piston in it get an X-Ring from him to replace the O-Ring. It will probably fix the issue. My first KJ used to eat the O-Rings as fast as I could install them. T-Hum did a lot of testing with it and fixed it with the X-Ring.

Hey T, should the carrier extension be a "pressed" fit or does it just slide in? The one (KJW) I just picked up has the extension installed but it spins in the carrier.

Just watch T's video. It's not hard at all.

This might not be the place for his. Mods feel free to delete if not. Thought some of you looking for a kjw might be interested in this http://www.airsoftretreat.com/classifieds/showproduct.php/product/6173/cat/3. This is not my gun and I don't know anything about it. I just thought it was a bit of a deal.

@IAN yes they will fit in fastmag's. I tried mine in the V2, turned them upside down and shook them. They didn't fall out but I wouldn't run them that way for daily use.......

I use the SOCOM Gear MK18 RIS II. It bolted on perfectly.... no issues at all. took like 10 min.

Sorry for the double post above... The sight went nuts for a few. So even looking at 2 for 5.00 ISH it still is looking like GG is winning out. I will check on getting packs though. I want to use 14.1oz bottles.

@Snoopy If my math is correct you are correct. I looked into this a few weeks ago. A bottle of GG is "Supposed" to be 1100ML and I pay $15.00 (US) for two bottles. So 7.50 (US) per bottle. A 16.4OZ Propane cost me about 4.50 (US) to buy it localy. Now convert OZ to ML (just googled a converter) and 16.4 OZ = 485.0058868752794ML. So almost 2.5 Bottles of Propane for 1 bottle of GG. IF the math is correct. I hope not, I have an idea for a remote fill rig that will work with Propane but I would rather use GG due to the oil and cost

@Snoopy If my math is correct you are correct. I looked into this a few weeks ago. A bottle of GG is "Supposed" to be 1100ML and I pay $15.00 (US) for two bottles. So 7.50 (US) per bottle. A 16.4OZ Propane cost me about 4.50 (US) to buy it localy. Now convert OZ to ML (just googled a converter) and 16.4 OZ = 485.0058868752794ML. So almost 2.5 Bottles of Propane for 1 bottle of GG. IF the math is correct. I hope not, I have an idea for a remote fill rig that will work with Propane but I would rather use GG due to the oil and cost

I finally got my spair mag loading assy from Claire. it looks like they made a change in the BB tube (T4) it is now metal and not plastic!!!! Nice to see this. I was talking to T about this last Sunday. I thought they should be metal to keep from breaking in the field. I also had a friend make a new metal rod to replace the plastic one (T6). I think they need to make the new metal T4 with a "belled" tip to do away with the small adapter that I keep loosing (T5).

@Bastel I get mine from airsplat. I just got of them from them and had no issues with supply.

I don't live where I can take it out to adjust the hop. I have to go to the field to make adjustments at distance.

Some one remind me why I bought this thing!!!!!! The hop is dismal!! When I adjust it, it banks to the right HARD. It looks like it's installed right. My KSC USP has as much range and is more accurate. I know this can be adjusted out but it's just disapointing. I am at my first game with it now. I have been here for 45 min. And I am so disapointed I am leaving. I went to .28's I even tried tied the bioval .27's. This day just sucks. Wow it gets worse.... I was going to show one of the guys at the field what it was doing and the selector switch will not work and th

1) PM T_HUM 2) Send T_HUM $$$ 3) Kick back and wait for a few days for UPS. 4) Install new TBB 5) Shoot all your friends.

@Phenom1 I can't wait to see what you come up with on this. I am going to try and take my gun out this weekend and try it with reavier BB's but i was not impressed with the hop up on my gun when I took it out a few weeks ago.

The FF will bolt up but if I remember correctly you will need a stubby gas block. it will help hold the front of the barrel on.

for those with bb's flying off to the side.....have you messed with the inner barrel / hopup? I just looked at mine and it looks like, if you tighten the grub screw too much, it could cause the hop up metal seperate or become "torqued". It looked odd to me that they would put a screw right where 2 pieces of metal join together.

I emailed on Sunday, got a reply on Tuesday and my parts will be shipped on Monday. Not sure why you didn't get a reply....

@Raven1 Thanks for the follow-up. I let BUSTA-CAPS use it and now the mag loading rod is missing, so i ordered another one plus another mag loader assy. better to have 2 of them on hand. Also thanks for the continuing saga of "AS THE KJW TURNS". I look forward to reading the reports and seeing if you find any breaks, fixes or tweaks.

Does anyone from the states know how long it takes to get parts from Claire?

Im buying 6 more mags in the morning if you want to get some money quick let me know. I will take all 6

@T_HUM If you need to take down some numbers from a newer model you can use mine and size it up. You have helped me out so much already its the least I could do.

Has anyone attempted to run Co2 in the mags? I have a friend that uses it in his pistol and has a cool rig for filling it in a regular gas mag. It would be nice for the enemy not to SMELL there I’m at.

So what BB weight do you guys use? I was using .20's and I am pulling to the right, Very noticeably. I was talking to a guy that runs a gas sniper rifle and he suggested it could caused by too light of BB's. Also, does anyone know where to get another rod for the mag feed tube? I let someone use her for a scrimmage and he lost the feed rod. I knew better than to let someone else use it.

Well i just sold one of my AEG's to get enough money for 6 new mags. It's time to put this baby to the test After the barrel install and with the reducer I am hitting ~400FPS W/20's. I can't wate to take it out and dial it in. Thanks again T_HUM