Airsoft Buddy

I just received one of my customer's reply. He told me that his WE GBB M4 received and found that just like a used airsoft rifle. I was shocked when I see the photos. It's really like used. But according to our normal procedure, we must test and double check on all items that before ship out to our customers. But this time, I don't know what happened to cause one of my customer received a WE GBB M4 like this. So I will arrange to ship a upper receiver and lower receiver to him on tomorrow for his replacement. Of course, I also will remind my colleagues to double check clearly before they ship

If you changed the stock to Vltor or Magpul and the hand grip, then will be excellent.

Today just got the new design with Hop-Up inner barrels and the new hop-up rubbers. Also the Complete Upper Receiver Sets are available too. For the new inner barrels, now just available at 363mm only. If you need 262mm, then we need to help to cut it from 363mm's inner barrels.

Just got the new information from WE today. All spare parts and reinforced parts are selling in the market, they mainly for gas charge version's WE GBB M4 (all existing versions selling in the market). For CO2, WE said that just need to order 2 small parts for exisiting's versions WE GBB M4. Then can use the CO2 mags. For the 2 small parts, WE will notice us as soon as possible. So your existing WE GBB M4 can fit for 2 kind of mags (gas charge and CO2).

New reinforced parts from WE. http://www.airsoftbuddy.com/index_eproduct...products_id=264

I will ask WE to see any news update about everything on WE GBB M4 at this Saturday night. Once I got any news, I will post it here to share with you guys. Such as the CO2 mags.

AB have the worldwide warranty for all WE GBB M4. AB's customer can send the problem parts to us, then we will ship back the replacement parts to you. This service is only provide to anyone who purchased the WE GBB M4 from us. For the warranty of the mags, we don't have the same worldwide warranty. But we have spare parts for sell at our store. Such as the follower, gas valve and charge valve.

If you use the design hop-up with inner barrel, the distance will be more. One thing I never told, this new inner barrel is 6.02mm. So the accuracy will raise up after installed to the WE M4.

Yes, outside and inside are made by steel.

Yes of course. You can see the hop-up is changed. And the inside of the inner barrel is anodized. So it's more smooth than before.

For the new hop-up design with inner barrels (262 and 363mm), I will place order to WE today. I hope I can get it as soon as possible to place at AB for sell. All WE M4s that we are selling is already included the new design hop-up with inner barrel. Now all delay problems happened before time are settled. I'm fully 100% work at AB now. So your enquiry and orders will response not later than 24 hours.

I've took some photos tonight about the steel nozzle assembly for WE Gas Blow Back M4. Actually this kit have 2 powers for you to choose. 300fps version and 480fps version. Only the nozzle made in steel. Please refer to the following link for both power versions. http://picasaweb.google.com/kcyauwil/Steel...EGasBlowBackM4# And these 2 items are now available at our store now.

Actually now we have the steel bolt carrier for sell. It's good to use on power over 350fps. For the CO2 mag, I've asked the boss of WETTI. He said that need one more month to launch. That's what he told me on last Thursday night. The stabilizer is hold tight the valve rod with the bolt carrier. If now without this stabilizer to hold the valve rod, it may easy to loose. So you need to use the screw driver to screw it tight again. After installed this stabilizer, then you don't need to check the valve rod loose or not. For the price list of replacement parts of WE Gas Blow Back

All prices are set by WE, so we need to follow WE's prices. But you can see that a lot of replacement parts are very cheap. And the Part #42, the one that we sell is around 300fps. It was tested by 0.2g BBs with top gas. Maybe the different weather, the power maybe different. The new design hop-up with barrel is now available to comes with all the WE GBB M4. For standalone item, then we may need a bit while.

For your information, all WE Gas Blow Back M4 at our store, are already comes with the new design hop-up with carbine length's inner barrel.

WETTI is correct. AB just a reseller.

As I know all china made DD Mk18 is comes with the barrel nut. My WE GBB M4 also installed the china made Mk18. The barrel just need a bit modify, then can fit for your WE M4. Just need to cut short around 2mm, then it can fit. But the outer barrel of the WE M4 also need to rip off around 1mm at the bottom. Otherwise, the barrel nut can't fully go though the outer barrel.

Dear ALL, The spare parts of WE GBB M4 are available at Airsoft Buddy now. Please refer to the photos that I took tonight. Just part of spare parts. All spare parts that you saw on the user manual are available. Except the magazine. http://picasaweb.google.com/kcyauwil/WEGas...rbineSpareParts# Airsoft Buddy

Dear ALL, The steel bolt catch just arrived at our shop. Anyone who broken his original steel bolt catch, please email your name and send me the photo(s) about the broken bolt catch. I will arrange to send you the steel one for your replacement. And now all versions of WE M4 will comes with this steel bolt catch in the packing. Thanks Airsoft Buddy

Of course we will have our way to do that, otherwise you guys won't happy to have the receivers without markings.

You can see the marking and words are not painted on the receiver. The finishing just same as what you see on Marui's M4. It's really nice> so I think should be anodized. This AFC version just have marking on it and the receiver's colour turned a little bit grey. The internals are the same. Power still over 450fps. If you want to use inner barrels of AEG, you need to modify the AEG one. It can't diretly fit to the WE M4. CO2 mags will available at January, 2009. Once I got any news, I will post out here. Well......... AFC version just have marking on the receive

Dear ALL, The new batch of WE GBB M4 is arrived on yesterday. Now we have 2 versions of this GBB rifle for sell. One of this is without any logos. The other one is with logo. For details, please refer to the following photo link. http://picasaweb.google.com/kcyauwil/WEGAs...rbineAFCVersion# AFC version just the color of receivers turned a little bit grey and the internals are the same as normal version. Power still over 450fps. And changed a aftermarket receivers with marking. The normal version now is with anodized receivers. For the prices, 2 versions are the same. Both i

Response the hole in the magwell. http://www.abload.de/img/wearout1r7yq.jpg I've passed this problem to WE about there is the hole in the magwell. WE's reply is due to they need to spare a little space for the spring, so there is a hole in the magwell. But this hole don't let the performance down. So it's ok at there. For the charging handle problem, WE will provide a replacement for all who purchased from us. Please provide your receipt number if you need it. Or you may try to order a real charging handle for your replacement. WE said that the real one is 90% same as the WE one

Thanks Lupus78!!!!! WE power restriction kit for GBB M4 rifle will available after 15 days at www.airsoftbuddy.com. Once you installed it to your WE GBB M4, it can reduce the power and doesn't reduce the felt recoil. Once I got more information about it, I will post it here and our website.

Sorry to hear that your M4's upper receiver was broken when received. I've already sent the your photos to WE and request to have a spare upper receiver for your replacement. Of course, you don't need to pay. That's our service. I will ship you the replacement when I got it from WE. May need a bit time for shipping from Taiwan. Sorry for keep you waiting. I'm so sorry about that.