ninelong Posted May 28, 2007 Report Share Posted May 28, 2007 Yeah, mine's the full auto version. For some reason, I cocked it today, and when I pulled the trigger, nothing happened. Semi, Full auto, safe, still no trigger action. Took out the slide, no joy. Can anybody help? Link to post Share on other sites
my_plague_666 Posted May 28, 2007 Report Share Posted May 28, 2007 i think you can sort this out by removing hte right hand side grip and theres should be a litrtle spring in there that pushes the trigger bar up which has probably dislodged. stretch the spring open a bit and put it back... that might work as it sounds like the trigger bar just isnt engaging with the bit that releases the hammer (lol, technical term) it cant do any harm eitherway Link to post Share on other sites
angel_wings Posted May 28, 2007 Report Share Posted May 28, 2007 Broken trigger spring? Does the trigger return to its original position once you've pulled it? Otherwise i would suggest looking at the trigger bar (the bar on the RH side thats just above the trigger) to see if thats moving when you pull the trigger. If its not moving then the bit that connects the two might be broken or misaligned If its moving then something is wrong on the hammer end of the bar, or in the hammer mech. itself. Should help to diagnose the problem! EDIT: Or what my_plague_666 just said Link to post Share on other sites
ninelong Posted May 28, 2007 Author Report Share Posted May 28, 2007 i think you can sort this out by removing hte right hand side grip and theres should be a litrtle spring in there that pushes the trigger bar up which has probably dislodged. stretch the spring open a bit and put it back... that might work as it sounds like the trigger bar just isnt engaging with the bit that releases the hammer (lol, technical term) it cant do any harm eitherway <{POST_SNAPBACK}> Tried that, but it was fine. I did, however, find out that there was something missing from the trigger arm (or at least I think something is). Something that pushes the thingy to engage the trigger. Pushed it with my finger, the trigger engaged. What's it called? Link to post Share on other sites
ninelong Posted May 28, 2007 Author Report Share Posted May 28, 2007 Yep, angel. The hammer end of the bar, I think. Link to post Share on other sites
Catman Posted May 28, 2007 Report Share Posted May 28, 2007 This might help you troubleshoot it: http://www.arniesairsoft.co.uk/forums/inde...howtopic=105989 Link to post Share on other sites
ninelong Posted May 28, 2007 Author Report Share Posted May 28, 2007 Thanks. So it's in the trigger arm. Something's missing to err. trigger the trigger. Anything I can do to remedy it short of buying a new one? Link to post Share on other sites
ninelong Posted May 30, 2007 Author Report Share Posted May 30, 2007 Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.