jamesdack Posted February 6, 2008 Report Share Posted February 6, 2008 Has anybody had any problems with the KA G3 plastic midcaps? Link to post Share on other sites
scratch Posted February 6, 2008 Report Share Posted February 6, 2008 Not because of the mag. Had to sand a few mm off the back to get them to go in with my CA metal body. 30 seconds a mag with a dremel. One mag had a blockage on the weekend, but that wasn't the fault of the mag. One of my Marui BB loaders stripped the screw at the bottom and came apart slightly, but I just taped around it and it was fine. Didn't realise it had dropped the O-ring into the mag, wrapped around a BB. This got caught near the top of the mag and stopped it feeding. 2 seconds with a screwdriver to take the spring out and get rid of the o-ring and it was fine. Fed perfectly, much more fun than hi-caps and much more useful than star 20-rounders. I would reccomend getting rid of the O-rings in your loaders, and taping around them at the bottom tho. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.