CA25 questions

[Donut]

So I have recently acquired a CA25.

I'm wondering if the CA25 would still take normal M16 outer barrel, front sets, and stock options. And while I'm at it, anyone know how I can remove the SR25 front?

 

And secondly, anyone know where I can find some low/mid caps for the CA25? Thanks

 

Oh, forgot to mention, anyone know anywhere that sells replacement CA25 parts? Mostly the proprietary parts like the piston.

[srpg]

I assume you mean the regular and not urx version

 

do you have the manual?

http://www.classicarmy.com/showcatalogue.j...id=277&pg=1

 

To remove the front set is like any other FF ras, unpin the front gas block, remove it along with the gas tube. Then unscrew the gray color RAS collar (anti clockwise to loosen) to remove the free float tube. Now you should see the exposed barrel and barrel nut, with a barrel nut tool you can then loosen and remove the barrel nut to remove the barrel+barrel nut+ras collar. The whole effort will vary depending on how much thread lock was used on all the threads by CA...

 

Yes you can use regular m16 barrel and front sets.

[Donut]

I see, thanks, I'll go that a try.