urbandork Posted May 11, 2005 Report Share Posted May 11, 2005 My last thread got messed up before i got to read the post. I was able to read kronics as it was the last post and could read it through his profile. I have a ver 6 mech with upgraded spring, torque up gears and metal bushlings. My gear box is stock and thus non renforced. As of now im running a 9.6v. My rof is a bit slugish and lately ive been thinking about using a 10.8 or even a 12v. My question still remains using all the stuff i have in my box now do i have to worry if im simply running more volts/higher rof. Ill have the same spring and gears as before, which held up so long on my 9.6v. Im almost positive i shouldnt have to worry about broken parts as all the stresses from the spring and on the gears should be the same. Just perhaps a lil bit more torque and hopfully a higher rof. I have and ankling that the reason my last thread got stalled, not locked' it jsut says some error happend, was due to fps limits. The spring i have in my guns is not of importances as i know it will work fine with the 9.6v now. I do not plan on putting a higher spring it, I just want to run a larger bat for a higher rof. Thanks for all replies. Link to post Share on other sites
multigl Posted May 12, 2005 Report Share Posted May 12, 2005 I'm going to venture a guess that your spring is well beyond the forum limits. Link to post Share on other sites
Slayer Posted May 12, 2005 Report Share Posted May 12, 2005 As with your last thread. This one is shut down. You cannot request information for a gun that is over forum limits. Once more and it will be an official warning. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.