HC Airsoft Posted June 30, 2010 Report Share Posted June 30, 2010 I'm a fan of replacing the consumable parts in my guns with OEM bits. I currently have a few gas pistols (Mk 23, P226, and a hicapa 5.1) that have seen a couple years of use. As such, their hopup rubbers are quite worn out and need to be replaced. I tried writing to gunsnguys about it, because they've normally been quite good about finding these sort of things, but to no avail. As a side note, I tried the LCT brand GBB hopup rubbers from WGC and found that they are too large to fit in the hopup chamber on my marui gas pistols. The halves of the chamber will not fully close due to their excess width. Has anyone else had this issue or tried this brand of hopup rubber? Thus, I turn to my Arnies friends - does anyone know where I can pick up original TM GBB hopup rubbers? Since all three of these use the same one, it shouldn't be a huge issue. Im not afraid to order from overseas. Thanks, as usual, for your help. Link to post Share on other sites
aznriptide859 Posted June 30, 2010 Report Share Posted June 30, 2010 Lucky you...I have 2 spare TM hopup buckings that I honestly don't remember where I got them from. I don't see me getting more GBB's - throw me a PM if you're interested Link to post Share on other sites
500fps@50mtrs Posted July 1, 2010 Report Share Posted July 1, 2010 Talk to a nice man called Mike Cripps here: http://www.eliteshootingcentre.co.uk/ Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.