Neko Posted July 28, 2010 Report Share Posted July 28, 2010 Recently put a KWA 2g hop-up bucking in my gun as well as a friend of mine's. Both guns are shooting pretty erratically now. Any suggestion as to why this would happen? There's no grease on the bucking. The barrels are clean. I'm concerned that it has something to do with the bucking being so thin? It slid into both hop-ups fairly easily. For reference, my hop-up unit is the black plastic Guarder one, his is a chinese one, I believe. Would some teflon tape help this? Link to post Share on other sites
sniperelite7 Posted July 28, 2010 Report Share Posted July 28, 2010 Erratically in what way? Whats your fps level? The 2gx doesn't work past a certain power level and BB weight. But if you have a normal setup then its probably because its so thin, its the airseal. Reinstall the bucking on the barrel but put dielectric grease on to the barrel(don't get it near the hop window) and slide the bucking on. Make sure it sticks. Then teflon tape or dental floss the end of the bucking to ensure a better seal. Link to post Share on other sites
Neko Posted July 28, 2010 Author Report Share Posted July 28, 2010 Erratic in the sense that I get way more fliers than I had previously. The seal on the barrel is really tight, it's the seal in the chamber that seems loose. Link to post Share on other sites
sniperelite7 Posted July 28, 2010 Report Share Posted July 28, 2010 Are you using a normal nub? It shoudn't matter that its loose in the chamber thats what the barrel ring is for. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.