Dodger1911 Posted May 30, 2005 Report Share Posted May 30, 2005 I have a question regarding my ICS m4 somebody out there might be able to help me with. I have an ICS M4 which I purchased along with a pre-upgraded cylender/spring group at 400fps(really shoots around 380fps) The question I have is I have ran my gun with the stock cylender group with no problems at all. Yesterday I had my first real occasion to run it with the 400fps spring group. I was running it with a 9.6v 1700mhz ICS battery. The gun would fire but when the trigger was released it wouldn't fire. I would push the forward assist to relieve the spring pressure and it would fire fine but wouldn't reset the trigger. I have heard that ICS guns have horrible tapet plates and I guess my question is does this sound like an issue with the tapet plate? If not does anybody have any ideas what the problem might be? Thanks in advance Link to post Share on other sites
Ghost_Rider Posted May 31, 2005 Report Share Posted May 31, 2005 Spring over forum limits for discussion. Read the rules. Link to post Share on other sites
nmcabecadas Posted May 31, 2005 Report Share Posted May 31, 2005 Thread closed for the above reason. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.