SlvrDragon50 Posted October 13, 2006 Report Share Posted October 13, 2006 Hello! My gun stopped feeding ever since i opened it up. It has guarder internals in the upper gearbox with a M16 cylinder and bearing piston head and guide, sp120, and piston, and m16a2 nozzle. I have a G&P metal hop up. Im thinking the nozzle isnt long enough causing the problem. Link to post Share on other sites
Almighty Posted October 13, 2006 Report Share Posted October 13, 2006 If the nozzle is not long enough.. you'd probably have double or mutliple feeding problems. If the nozzle is too long, then the AEG won't feed any BB at all. Link to post Share on other sites
renegadecow Posted October 13, 2006 Report Share Posted October 13, 2006 an unseated nozzle perhaps? if it is, the tappet plate will just be sliding back and forth with the nozzle remaining in place. check inside the mag well and see if it (nozzle) closes properly. Link to post Share on other sites
SlvrDragon50 Posted October 13, 2006 Author Report Share Posted October 13, 2006 Well if I push the nozzle in, it will spring back out. Link to post Share on other sites
renegadecow Posted October 13, 2006 Report Share Posted October 13, 2006 it will too if its unseated. try holding the nozzle with your fingers and fire. If the nozzle is retained in your fingers then its unseated. Link to post Share on other sites
SlvrDragon50 Posted October 14, 2006 Author Report Share Posted October 14, 2006 I tried that and it moved back and forth and I couldnt hold it in place Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.