SlvrDragon50 Posted November 4, 2006 Report Share Posted November 4, 2006 WEl, my gun recently started to shoot again... I have NO clue why.. WIth my hop up off, it shoots into the sky (.2s). It also some how shoots 45 degrees to the lft or to the right.. And it shoots every 2 to 3 times BUT no misfeeds Link to post Share on other sites
Phatvortex Posted November 4, 2006 Report Share Posted November 4, 2006 Clean your barrel? Make sure you're using decent bb's? Check the hop-up adjustment isn't opposite to what you think it is? If its firing every two to three trigger pulls, then it is misfeeding......... Link to post Share on other sites
SlvrDragon50 Posted November 5, 2006 Author Report Share Posted November 5, 2006 I have Matrix >2s Im sure the hop up adjustment is opposite because when I turn it on, then the nub shows.. IM pretty sur emy barrel is cleanb ut Ill clean it again today. Link to post Share on other sites
Fathead Posted November 5, 2006 Report Share Posted November 5, 2006 Inspect your barrell carefully, i have seen a similair problem with my friends m4 and it turned out there was a small dent on the inside of the barrell that was barely noticeable but sent bbs flying every which way. Link to post Share on other sites
pimpinvaderman Posted November 5, 2006 Report Share Posted November 5, 2006 What kind of gun do you have? If you have an aeg try removing the barrel and looking down it to see if the hop up is stuck on full. That happened to my and I just took apart my hop-up to find that I had something lodged in it. When I removed it my hop-up worked fine. Link to post Share on other sites
SlvrDragon50 Posted November 5, 2006 Author Report Share Posted November 5, 2006 Not stuck on full.. Its an ICS M4 with a guarder FTK except it doesnt have the gears Link to post Share on other sites
Aod Posted November 6, 2006 Report Share Posted November 6, 2006 have you recently put a new Hop in? did you insert the little thing in the correct manner? Link to post Share on other sites
SlvrDragon50 Posted November 6, 2006 Author Report Share Posted November 6, 2006 Wel.. I was looking at the charging handle.. and hte spring kinda.. outstretched itself.. Its hanging down now so Im going to get a new one.. Anyone able to reccomend a good charging handle or should I stay with an ICS Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.