g.pugh01

LT Tahoe. It could possibly be a break in one of the wires or even a faulty connector between the battery and the box mag. Get your multimetre out and test for continuity on each of the wires and then work from there. Pugh.

What are you guys doing to them?? I've had my M249 Para for 6 months now and used it almost every weekend and put excess of 40K rounds through it with NO problems what so ever. The only problem i had is when i slipped a couple of weekends ago, landed on the gun and snapped the top of the box max off. (But alot of superglue fixed it a treat and it still works perfectly! )

Sorry dude. Not seen that before. All the one's i've seen have had the brass feed tube with the spring attached to it. I take it it feeds ok. So if it ain't broke don't fix it i say! Pugh.

Mine has the brass tube from the spring to the feeding mechanism, does yours just have the spring all the way down to the feeding mechanism? Not seen that before. Is it new or 2nd hand? Where did you get it from? Pugh.

Very nice. Is the Serial number for real though? Pugh.

Doc, i've had mine for a month or so now and gamed with it a few times. It's not let me down once. (Touch wood) From what i can gather unless your unlucky you only get problems if you start messing with it. Leave it standard and they are fine. Better than paying over 700quid for a TOP or CA one still. Pugh.

Thanks guys. I had a play today and screwed the allan screw clockwise (into the Hop unit) until the bb's flew straight. The head of the allan screw is about 2 - 3 mm below the top of the hop unit. Thanks again for the good advice. Pugh. P.S. It's a beast once you get it set up right. I'm well impressed!

4-5mm below the top of the plastic hop unit? Wow. cheers guys i'll try again tomorrow.

I did turn it clockwise but i dare not turn it any more. It's gone stiff and i've heard that you can over adjust the hop ups on these guns and damage them. The top of the allan screw head was level with the hop unit. Pugh.

Hi. I got my Minimi yesterday and today i tried to adjust the hop-up and it didn't make any differece at all? From it's stock position i adjusted it anti-clockwise until the allan screw was almost out!! Do i need to do anything to the rubber or barrel to get it to work correctly? Cheers in advance. Pugh.

Cheers Chris. I've got a couple of hundred of them on my PC from when i do my CNN news man bit! Only problem is that i use a 12M pixcel camera and the files are too large to upload. I should really reduce the quality down a touch! Any ideas of how to make the photos i've already taken smaller? ATM i have to print them out then scan them in on a lower quality scanner!! As you can guess i'm not very computer literate.

http://www.arniesairsoft.co.uk/forums/uplo..._165_113019.jpg Then there's Dragon! Don't want to be in front of him when he lets rip with that AK!! http://www.arniesairsoft.co.uk/forums/uplo..._165_474840.jpg Then there John in the fort. Help. There coming!

And of course you've got the mad professor (Brummie to you and me) Don't try this at home kids!!!