stickyittoyou

Once I get mine and if no one has already sent you a message about it, I'll send you the part number. My gun should be in sometime next week. @T_HUM Any news on the updating of your site? I want to buy your piston, a precision barrel, and BCG Extension

T_hum how much would it be to get a precision barrel, piston, and a buffer tube detent support? (BTW... did anything come of that?! I've never seen a picture of it.)

So Raven. How long do you think your Service Guide will take to compile together?

Soon I will be the proud owner of a KJW M4 CQB. Now for the waiting game.

This explains it all.

I actually do not own one yet, sadly. I've just been with this thread for a long time now; but when it comes to lubing a rifle (real steel or not) EVERY moving part and ANY place where there is friction needs to be soaked. Have you checked your upper receiver where the BCG slides? I'm wondering if it is worn there; BETTER YET! Check if your forward assist is touching the BCG; in-case someone at the factory accidentally put it in upside down it could be rubbing the BCG. as for the brass tube here is a picture of the brass tube from page 1. It looks quite normal. There's timing in GB

Sounds like your trigger grouping needs to be lubed. Have you done any lubrication to the gun? I highly suggest re-lubing EVERYTHING before using the gun. This goes for everyone else who is planning on buying ANY gun real or not. You always wipe off the old lubrication and douse it in more lubrication. So my understanding is that your BCG (Bolt Carrier Group) is stuck in the forward position, when you open the gun; the hammer (Located in the lower receiver) is in the "fired" position AKA Up and already fired? Sounds like it's either slipping, not engaging all the way that it doesn't lock b

So Raven... does T_HUM plan on making a hardened steel bolt catch at all in the near future? lol Nice test! Yeah looking at that metal though it's obviously not hardened... sadly. Better yet! With this mod it looks like you'll just have to put the switch on the mag to not utilize the bolt catch. Should that be the next test to see how many mags you can go though?

Now that the CQB version has arrived; I'm really considering taking the dive for it; the gun looks awesome with the shorter barrel. So going to get a barrel extension on it. G&P Knights Barrel Extension. Mods please don't delete my reference picture(s). This is the sight that i have, it's meant for shotgun recoil... so it's going to be good. (4 style reticals) I think those will look nice on that gun.

Kai, how's the gun holding up so far? I know I have been gone for a while; has T-Hum put out anything else? I keep checking his web page here and there, but the site hasn't changed.

Hey guys, so what is the progress on T_HUM's parts? I read a page or two back that there have been issues that have arisen?

Now... I want to know before he starts to sell them, has he talked with MAGPUL? They might go after him if he hasn't received any licensing. Just because it's a shell doesn't mean that it isn't a finished product that needs licensing to sell. After all it will be an Authentic P-mag will it not? I love the idea, I just don't want to see T_Hum go down because of something so small.

Any news on if there are any in stock anywhere around the globe? Besides Airsoftbuddy who has gone silent, and is a money swindler... some guy on the WE side of GBB paid for a gun and he has yet to receive any confirmation and it's been well over a month... so BUYERS BEWARE! AIRSOFTBUDDY IS A NO GO! BUT if you're into purses then go right ahead.... lol T_hum have you tried to talk with some suppliers in Asia to be a U.S. Supplier? Would totally be rockin!

I sure hope T_hum can make one of these. I believe that someone made them, reason I say that is the website is an auction much like Ebay; so T_hum I believe there are no copyright laws on it. I haven't even seen anywhere online in any way shape or form a company creating the parts for a UBR stock.

Well T_hum this means you can make another add-on product just like that one there. haha... a nice stock tube. Seeming certain companies from Taiwan won't ship outside... by obvious reasons they are numb because there goes 3/4ths of their sales. I can't wait to see what you have in store for Tight bore's. ORRrrrrrrr We can find someone to buy off of that company and then we pay the extra to ship it out? Would be nice for us non-Taiwanese... dontcha think?!!? BETTER YET! We need someone to buy one and then ship it to T_hum that way he can examine it.

someone on another forum seeming they would not know about T_hum's work.

Hoping I can buy a used one. I don't care if it is used... lol or even broken in the areas that do break I want one! I'll get the replacement parts from T_hum and it'll be all good.

WOW 31 dollars shipped to me?! Can I rightfully say I love cradleairsoft? lol Are you planning on making precision barrels?

HAHA! BURrrrN! Wdahm519! (j/k) Glad I helped you considered it T_hum Totally Now...time for you to nicely tap back the bent metal... for Raven lol, Hope all goes well. I can't wait to see it. In theory this will also prevent from a breakage like THIS happening? Because it brings the stress from the pin and that small piece of metal and distributes it evenly. Correct?

something like I was trying to describe?

T_hum is there any way of producing a piece that can support it and be connected to the body by the back receiver pin? or does the hammer and the rest of the trigger assembly get in the way? I'm just trying to see if there could be a small block of metal cut in areas so that it does not get in the way of the mechanisms and yet supports the back of the receiver. Do you get what I am trying to get at? I really can't describe it... and I'm not good at drawing something out on the computer. lol In this picture I see PLENTY of space that can allow for a block to be placed in there to make it more

Does this place have a web page at all? I would like to see this GBBR. I just want to know if it's upgradeable.

Well Airsoft GI and other places are certainly counting it as a Gen. 3, what did they change on it to provide better customer satisfaction? http://www.airsoftgi.com/product_info.php?products_id=5899

It's a legit question... I know the We-Tech SCAR is at Generation 3 now. So please tell me what makes it so much different then generation 1? When you buy one are you less likely to get one with a torn bucking? Does the butt plate hold up to what it was originally intended to used with for gas? (Co2 and Green Gas). Do the valves end up bending like all of the M4's I have been seeing from WE-Tech after some "promising" skirmishes. What I mean to say is.... every single time I want to come back to this lower priced gun, there just seems to be something else that goes wrong with it... I kno