a4andy

You better hope those G&P Gears will last you, one of my old G&P drop-in gearbox gear failed on me the other day (sector axle, exactly like yours). I replaced it and my MRP gears with JG gears. Anyways, practice makes perfect when reassembling, I must have dissassembled and reassembled my MRP gearbox about 15-20 times trying to changing springs, installing new parts, install mosfet, and just to check how all the new parts are holding up inside the gearbox (looking for wear and tear on new piston specifically). I found the hardest part in installing the gearbox is actually the darn

What midcap brands are you guys using with your MRP? I have some years old MAG Plastic Midcaps and they fit way to loose in the magwell, they would need to be pushed forward for them to feed. Same with my S.Arms midcaps Anyone try those plastic KA Midcaps? They look fairly cheap for 10 mags

Funny, I was trying out a Guarder SP90 spring also, but sadly it only gave me like 275fps . I was hoping ~330. Maybe I have some compression issues or something cause the spring charts i found state the sp90 to be around 330ish Anyways, I might get one from Infected Armory also then! Did you get the small or long mosfet w/ AB? Thanks for your input!

Does anyone get overspin when they shoot while running a lipo? I just got my MRP yesterday and my 7.4 and 11.1v lipos give overspin when i shoot it. The only battery that works fine is a 8.4v nimh battery from a JG gun I guess I have to invest in a AB Mosfet that will have to fit in the buffer tube, any suggestions?

I bought the entire Bolt Carrier w/ NPAS Kit from RATECH's website and been having lots of problems. First, they forgot to send out the key to adjust the FPS. I emailed them, their customer service was very nice and sent one out free of charge. Now that I finally get it today and super excited to test out my NPAS almost a month after my original order. I find out the tool doesnt even do squat. I disassembled the nozzle following a guide on their website just to find out the nozzle is just a stock nozzle. There is no NPAS kit installed install inside. I just emailed them again, I'm ge

I remember seeing someone able to get the Magpull BAD Lever on it with modification on youtube. http://www.youtube.com/watch?v=QLGLNYIRSCY

I just received my NPAS bolt carrier a few days ago, but sadly they forgot to include the tool to adjust the NPAS. Anyone know what kind of tool it is so I can find a homemade solution until I get them to send me one? Also, I ended up buying a King Arms bucking, and Firefly bucking (both HARD). Firefly is much easier to install, The KA one was SO hard (the rubber was insanely hard compared to the stock and ff one)! It was a pain to get on the barrel. I havent had time to field it with the new bucking, but the firefly one seems to be a lot better, the KA one kept flying right after around

Anyone have any recommendations for new bucking and possibly a tightbore barrel for the long open bolt version. The promy one that was specifically made for this gun is for the short version I was also thinking about getting this: http://shop.ehobbyasia.com/ra-tech-n-p-a-s-open-bolt-carrier-for-we-open-bolt-system-pdw.html So I can adjust the FPS for CQB play or outdoor field play, anyone tried this?

I found the easiest way to load open bolt mags is using a speed loader with the attachment thingy like below: