Jump to content

Im going space

Forum guru
 View Profile  See their activity

  • Content Count

    1,301

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Im going space

  1. Im going space
    oh i see the pic now. missed that post! Looks like one of two things: 1) the arm is bent (its thin metal) 2) rubber is not sat straight.
  2. Im going space
    its as precise as you set it up.
  3. Im going space
    Likely a little stiff. clean it up and freshly lube it. Stiff is better, means it wont come loose.
  4. Im going space
    Well there you go guys, dont be getting that one! I can see why its failed, the laser module is just glued (badly) onto a plate. Got an ACE1 one on the way from uncompany now as theyve been unbelievably fast thes e last few weeks.
  5. Im going space
    Which RMR? Dunno (points wildly in deltazero's general direction) And thats super useful, thanks. Wasnt sure if it hooked over the top or the bottom!
  6. Im going space
    Mine looked the same until i actually fired it, off goes the dot, but no worries, a handy bb hit the lens and finished it off Can someone do me a favour and take a picture of the spring that holds the Hop to the outer barrel? Need to see how its meant to sit, as i popped open the hop to have a look at the barrel & rubber. If this is the standard rubber (is it delta?) then a for effort to VFC.
  7. Im going space
    Wouldve let me measure up the tracer bits too.
  8. Im going space
    Yup. Dont got access to a 16mm tap either so wait it will
  9. Im going space
    In the video they just unscrew it. I have the kit on the way, i just wanted to nose around the can (and maybe just retap the current 14mm to 16) Surely its doable with normal tools?
  10. Im going space
    gonna throw a question out there, its not FNX per-se, this bloody osprey, how in the hell do i take the thread out to swap it? the black bit with the teeth isnt threaded and just spins?
  11. Im going space
    Yeah thats true, but with most thing it is what it is, the only old place was mike cripps, but he narrowed to TM then to 1911/Capa and now just capas....
  12. Im going space
    Impulse 101. formerly pulse japan, they can order you any of the parts you need form TM, its not fast, but its quite cheap.
  13. Im going space
    oooh, see you thurs be a darlin and bring the FNX Feel free to borrow some of my gas if you want
  14. Im going space
    snagged a real one from arc precision before viv disappeared.
  15. Im going space
    im still happily recommending the Inforce APL. great torch. and quite cheap for a RS (circa £100)
  16. Im going space
    i will corner Thatguy404 next time he is on site and do a short video if time permits. (of the HK vs M&P)
  17. Im going space
    Should be fine.
  18. Im going space
    Months? Years? There is no ETA. Small business with small numbers
  19. Im going space
    Heatshrink
  20. Im going space
    Solder the two red wires together just outside the gearbox.
  21. Im going space
    The hop is the new version along with the HK45 and PX4, same barrels and rubbers, but you dont need to pop the slide to adjust!
  22. Im going space
    Friend is having the tester, and buying me a fresh one
  23. Im going space
    ITS HERE http://www.btcairsoft.com/spectre_newv2gb
  24. Im going space
    Its very snappy, i reckon it'd cope fine.
  25. Im going space
    The Fobus EMC is an awesome holster. No need for a lanyard.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.

  I accept