amateurstuntman Posted May 26, 2007 Report Share Posted May 26, 2007 OK so this is not your standard "what magz am fit my glok" or "what am best WA" I have a WA M4013 TSW Shorty .40 and it is the mutts. However my lovely fiancee dropped it on the concrete path and I need a new slide. I will probably get a metal one and I need to know how many of the SCW2 upgrade parts will fit in it. Specifically I am intrested in power upgrades like nozzle, blowback engine parts, rocket valve and hammer spring. I would like to still have a snappy blowback and slightly improved power. From looking at the exploded diagram I think I can see that the firing pin is different to an SCW2 one fitted to a 1911/2011. So, what does fit? Of the parts that do fit which are best? I look forward to your contributions. Link to post Share on other sites
Mathub Posted May 29, 2007 Report Share Posted May 29, 2007 Well, although being labeled SCW on the box, the 4013 is good old magna blowback. Except the fixed hopup. I don't think you'll find any spare/upgraded nozzle, rocket valve. The system is quite an hybird between a WA M92 and a magna 1911. I've had a 4013 tsw with a prime metal slide, it only need a stiffer recoil spring. As with most WA, no need to upgrade gas system with metal kit, especially with a double stack magazine. Your metal slide will be lighter than the stock one. Now I own a full metal shorty 40 based on a 4013 tsw. With just a harder recoil spring. It has enough power for such a short barrel. Link to post Share on other sites
amateurstuntman Posted May 29, 2007 Author Report Share Posted May 29, 2007 Brilliant, I am set on getting on a full metal kit. The TSW has a two stage recoil spring, which strengthened recoil spring would you recommend? Which bits are M92 and which are 1911? Thanks buddy, I have seen your guns in the pics thread and I am very impressed. My knowledge is pretty specific to the TM system and KSC TMPs. Link to post Share on other sites
Mathub Posted May 29, 2007 Report Share Posted May 29, 2007 I just remove recoils springs and put an normal one in it. When I said an "hybrid", I meant, it looks like a 1911 magna nozzle, but with a decocker like a m92, meaning it would be shorter. Link to post Share on other sites
amateurstuntman Posted May 29, 2007 Author Report Share Posted May 29, 2007 OK so the parts are unique with a hybrid design. Bum. I'll just bodge it together and try things until it works. Thank you for your time, I like to help as much as I can with tech problems but most of the time when I ask for help the question is so specific that most people don't know the answers. Have a +1 cookie. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.