pfcstoner Posted July 11, 2007 Report Share Posted July 11, 2007 he hammer will not lock back when i pull the slide back. anyone have any idea what is wrong?? the hammer just returns to its original position and causes the slide to jam. Link to post Share on other sites
SmashJoehanson Posted July 11, 2007 Report Share Posted July 11, 2007 he hammer will not lock back when i pull the slide back. anyone have any idea what is wrong?? the hammer just returns to its original position and causes the slide to jam. <{POST_SNAPBACK}> I have had loads of trouble with this on one of my we dragons. Take the grip appart (if you feel confident working on it) and realign the 'sear and disconnector spring'. Mind you, on mine it only fixes it for about 10 shots then it pops out of place again. Link to post Share on other sites
pfcstoner Posted July 11, 2007 Author Report Share Posted July 11, 2007 where might that be located? i have taken the gun apart many times but cannot find that? Link to post Share on other sites
SmashJoehanson Posted July 11, 2007 Report Share Posted July 11, 2007 Its inside the grip, behind the grip saftey. Its a flat piece of metal with 4 arms. Link to post Share on other sites
Utty Posted July 11, 2007 Report Share Posted July 11, 2007 Aka the leaf spring. Link to post Share on other sites
pfcstoner Posted July 11, 2007 Author Report Share Posted July 11, 2007 i realigned those but it still wont work . Link to post Share on other sites
SmashJoehanson Posted July 11, 2007 Report Share Posted July 11, 2007 Then you realigned it wrong, which i have done numerous times. Keep trying different combinations of where the pins go. Link to post Share on other sites
scithe Posted July 11, 2007 Report Share Posted July 11, 2007 be sure to hold it in place and try pulling the hammer back to see if it sticks so that you wont have to keep taking it appart and puting it back together Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.