SlvrDragon50 Posted August 16, 2007 Report Share Posted August 16, 2007 Hey guys! Simple question.. Is this: http://cgi.ebay.com/Quick-Release-30mm-QD-...oQQcmdZViewItem Going to be close or the same dimensions as this: http://cgi.ebay.com/G-P-US-SOC-30mm-Reflex...oQQcmdZViewItem Link to post Share on other sites
Magsz Posted August 16, 2007 Report Share Posted August 16, 2007 Yes. Link to post Share on other sites
SlvrDragon50 Posted August 17, 2007 Author Report Share Posted August 17, 2007 Alright thx.. And Im just curious.. Why do people use cantis instead of a standard high mount? And dont cantis not have a see-through hole? Link to post Share on other sites
Fuser Posted August 17, 2007 Report Share Posted August 17, 2007 Ideally a cantilever mount is used so that the scope or aiming device can sit above and out of the way of another mounted device. And yes, there is a small hole at the base of most of them that you can see through. Link to post Share on other sites
SlvrDragon50 Posted August 17, 2007 Author Report Share Posted August 17, 2007 Ah, I see.. And iron sights can be used while the AP is mounted correct? Link to post Share on other sites
aznsk8s87 Posted August 17, 2007 Report Share Posted August 17, 2007 Hm, well, mine kind of can... but I can't look through the hole at the bottom. You'd need a VERY low profile BUIS to do it. Instead, I can just use the flip up iron, look through the rear peep hole, through the AP (turned off), and line it up with the front sight. Link to post Share on other sites
Fuser Posted August 17, 2007 Report Share Posted August 17, 2007 Yes. When I have an AP mounted, I only use it for quick engagements. If I need to do precision aiming, I'll use the ironsights. It's good to have a flip-up BUIS so that there's nothing in the way of the AP while you're in the heat of battle, but you can flip it up when the time comes for real aiming. Link to post Share on other sites
SlvrDragon50 Posted August 17, 2007 Author Report Share Posted August 17, 2007 Awesome.. I have flip up front and rear sights Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.