klatrechris Posted April 9, 2008 Report Share Posted April 9, 2008 after endless hours with searching the internett and asking around i found out that PDW´s m99 kit is not to be found anywhere. so i am going to build my own.. the internals iam going to use is a maruzen Aps2 i need you help with som details for this prosjekt.. i have a buildplan allready made. i need to know what the dimenson on the upper and lower reciver is and the length of the reciver. so if anyone from the us or UK happens to have one and want to give me these measurements i would be very very happy the most import thing i need is the upper and lower reciver so i could start building in the weekend.. i hope to hae this one ready before 24. may. Link to post Share on other sites
Direct Posted April 10, 2008 Report Share Posted April 10, 2008 Hey, fellow Barrett entuasist, good luck on your project mate! Link to post Share on other sites
terrorist killer Posted April 10, 2008 Report Share Posted April 10, 2008 The might have measurements on world.guns.ru also are you using one shot like the Real Steal or making a magazine Link to post Share on other sites
klatrechris Posted April 10, 2008 Author Report Share Posted April 10, 2008 it going to be like the singel shot version . but i will use the Aps orginal 25shot magazine also. if that was what you ment? Link to post Share on other sites
terrorist killer Posted April 10, 2008 Report Share Posted April 10, 2008 yeah that was what I meant, oh and how are you going to do the bullpup system Link to post Share on other sites
klatrechris Posted April 10, 2008 Author Report Share Posted April 10, 2008 since i am using a Aps2 for the projekt the magazine is going in the front.. and the cocking lever is still *fruitcage*tion.. Link to post Share on other sites
sniper_boi Posted April 13, 2008 Report Share Posted April 13, 2008 If you need measurements, the ideal place would be to look at Barrets website, they'll have all ya info you need on there. As for leaving the Mag at the front, its not too hard to make it go to the back. All you need to do is move the components back, as for the trigger, you need to come up with a way to make it engage when you pull the trigger. Normally i would say use wire to do it, but i doubt it'll be strong enough to engage. Better still, when you disasemble the APS 2, study in the inner workings etc, then you might be able to come up with a resolution to making it fire with the mag at the back. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.