Milith Posted September 17, 2008 Report Share Posted September 17, 2008 They're all the same anyways, and mine doesn't have any trademarks. Pretty much, it's doing good and all, but sometimes, the blowback isn't strong enough to fully cock the hammer. So after every shot or so it goes back into the half cocked position. This wouldn't be a problem if for some reason, it starts shooting 2-3 times in a row? After every few shots? Something is wrong with my blowback or hammer, and i don't know what. Any help is appreciated. Link to post Share on other sites
Zmarre Posted September 17, 2008 Report Share Posted September 17, 2008 I blame your mag. I noticed a big difference in kick between the BELL mag and the HFC mag, for instance. Link to post Share on other sites
Romulus Posted September 17, 2008 Report Share Posted September 17, 2008 The HFC, KJW and KSC M9's are not all the same gun. The HFC and KJW are TM M9 clones while the KSC is a different design (I believe that it has a working decocker). KSC and KWA M9s are basically the same though. Link to post Share on other sites
Milith Posted September 18, 2008 Author Report Share Posted September 18, 2008 I've concluded I've either got a KJW or a KSC m9. Probably KJW. Anyways, it's not the mag, because I have 3 identical mags. Link to post Share on other sites
BrooklynBorn Posted September 18, 2008 Report Share Posted September 18, 2008 I've concluded I've either got a KJW or a KSC m9. Probably KJW. Anyways, it's not the mag, because I have 3 identical mags. Yes, because KJW doesn't have trades, while KSC is ABS, and does have trades. Check for any leaks, and make sure the valve knocker is working properly. Link to post Share on other sites
Milith Posted September 18, 2008 Author Report Share Posted September 18, 2008 May someone help me find out where the knocker is? Possibly an exploded diagram? You guys have been a great help. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.