Apex Posted April 25, 2009 Report Share Posted April 25, 2009 Afternoon folks, hopeing the rof fiends could help me out here. My current moded L85 is shooting at 330fps and 18rps which is good but I would like to hit the magic 20rps (well magic for me anyway) Current Mods 509mm Prommy 6.03 TB Element M4 / M16 Hop Chamber Guarder Hop Rubber G&P Piston with one tooth missing and the other two shaved down slightly Doc400's L85 Piston Head Guarder M100 Spring L85 Teflon Coated cylinder from www.powerupgrade.cz who sadly seem to have gone L85 Replacement Cylinder Head again from www.powerupgrade.cz L85 Replacement air nozzle again from www.powerupgrade.cz ( this stopped the leaking and stabilised the output ) Deans connector on the battery and subsequent connectors - fuse removed Component Shop custom 4600mAh 8.4v NiMh Battery Guarder High Speed Motor Now i am open to suggestions on how to up the rof slightly - not looking for massive improvements Link to post Share on other sites
SgtBojangles Posted April 25, 2009 Report Share Posted April 25, 2009 MOSFET, perhaps? Link to post Share on other sites
RC-1138 Posted April 25, 2009 Report Share Posted April 25, 2009 MOSFET, perhaps? Yeah I agree, sounds like that should be on your list. Might not put you at 20 RPS but it should get you darn close. Link to post Share on other sites
EmptyChambers Posted April 25, 2009 Report Share Posted April 25, 2009 Rewire it to something that isn't chinese speaker wire... Link to post Share on other sites
RC-1138 Posted April 25, 2009 Report Share Posted April 25, 2009 Heh, I noticed a key thing your missing there, a LiPoly. Stick a lipoly in there and you'll hit 20 RPS easy. Go for something in the 25-30C range. Link to post Share on other sites
Apex Posted April 26, 2009 Author Report Share Posted April 26, 2009 Rewire it to something that isn't chinese speaker wire... I think this out of any of the other suggestions will be the first one I try, wonder if the 14AWG stuff i have will fit Has for MOSFET and LiPol, the MOSFET is a no brainer for me and it was one I was looking to put on my shopping list. LiPol, don't have a charger so me being me i would have to get a decent LiPol I would need to get a decent charger. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.