KWA/KSC Glock 17 hammerspring replacement.

[HolyHandGrenad3]

I just recently bought a Guarder 150% hammerspring for my KWA M17 from eHobbyAsia, and don't know for sure how to replace it. Sure, I have my ideas but I'm not going to attempt it on a whim and mess up my gun... Could someone please explain how to do this? Pictures showing what to do would be nice, but not nessesary. Thanks!

[aznriptide859]

You'll need to first hammer out 2 pins, one that holds the trigger mech in, and one that holds the hammer mech in. Both are connected by the trigger bar, so you'll need to release that out. Then there's another pin that basically holds the entire hammer assembly inside the mech - study it first, since you'll need to know how to put it back together.

 

It's a lot easier on the G17 than it is for any FA variant like the G23/G18C.

[Rizla]

I can't get you the link (work computer blockage ftl) but there's a good guide on unconventional airsoft for the G18 which works well

 

 

[HolyHandGrenad3]

Thanks, Rizla! Found it: http://unconventional-airsoft.com/2003/12/...ion-and-review/

[Gumball]

You can also watch this guy on youtube. Its a full dissasembly of the KSC 18c which should help you out a bunch.

 

 

This is part 1/10. The rest of the parts can be found on the side scroll window next to the video.