Beretta Trigger problem

[david3558]

Hey all...need some help on my HFC Beretta, wait...this is internally identical to KJW and Marui Berettas. The problem I seem to have is this:

 

1. I pull trigger

2. The hammer begins to move back

3. I pull trigger all the way back...and the hammer returns...like normal

4. The trigger does not return to orignal position, and I have to lightly push it foward to make it work...

 

 

+1 to anyone who can help..

[xRAZERx]

Have you ever taken the grips off the gun? IIRC there should be a trigger return thingy under the left one that could have come off

[LoneWolf]

I would suggest taking the gun apart, cleaning it and applying some lube to the trigger assembly. Also check that the spring is not broken or anything.

 

Cheers,

Mike

™

[sp00n]

Trigger return spring has either broken or come loose. Take the slide off the frame and you should see a spring wrapped around a bar right over the trigger.

[Duff Beer]

It sounds to me like the actual trigger spring not the hammer bar spring has gone fubar. Has the trigger itself got any tension when you pull it? If not then you will need a new trigger spring which are extremely rare (although the real steel ones work apparently).

Take the grips off as well, but be careful not to lose the tiny spring on the right side of the gun under the hammer bar. This should look like half a paperclip and goes over the screw point in the frame and in the groove on the underside of the hammer bar. If that does not fix it then it's definitely your main trigger spring.