Shao14 Posted March 22, 2005 Report Share Posted March 22, 2005 (edited) Finally, I got my own Maruzen P99 (thanks to Redhawk) with silencer (but not the box set), and I can confirm almost everything Arnie said in the review. One thing, Arnie if you are reading this, it seems there's a typo in that table where you recorded the power and range for various gases you tested. For the Abby ultra gas, the range you recorded is half as others, but the fps is comparable to green gas. Just wondering what happen to the range when you used Abby ultra gas. I guess there's really no need for me to write another review of it since I'll be just re-saying pretty much everything but less eloquently than Arnie has. But a few points I'd like to stress again: Yes, the silencer makes a noticable difference. The METAL subframe inside the slide is really nice. Nice decocking button. The power and blowback action suck with 134a gas. Slide is impossible to lock unless you warm up the mag to near body temperature. When stuff the magazine all the way to the top, mine completely fails to cycle the slide, and shoots the BB in the chamber like a NBB (let me know if some other factors contribute to this failure). I only put 21 BBs in the 24 rd mag nowadays. On green gas, or a mix of green gas and 134a, the blowback action and power improve DRASTICALLY! One of my most powerful GBBs on green gas. Barrel rattles a bit especially with the silencer on, but the accuracy is outstanding either with 134a or green gas. One of my most accurate GBBs. One other thing that I don't think Arnie made it clear. When the trigger is at DA position, one can either shoot the gun to set it to SA position, or rack the slide AND then manually pull the trigger back half of the way. It is kind of different from Beretta that merely racking the slide of the P99 will NOT set the trigger to SA position although the first half of the trigger pull has no more resistence. And then the trigger will stay in SA position after each shot. However, when the trigger is in SA position, and you manually cycle the slide (or use the decocking button), the trigger will be reset to DA position. Edited March 22, 2005 by Shao14 Quote Link to post Share on other sites
Shao14 Posted March 22, 2005 Report Share Posted March 22, 2005 It seems that the slide on mine fails to blow back sometimes even when the mag is half full (and it shoots the BB in the chamber like an NBB). Is there anything else that may cause this failure? When I manually pull the slide, it felt pretty smooth. Quote Link to post Share on other sites
TheBauer Posted April 3, 2005 Report Share Posted April 3, 2005 Shao14... my p99 slide didnt used to go all the way back, so i whipped off the slide added some lube and popped the slide back on... works fine again. give that ago.. Quote Link to post Share on other sites
Donut Posted May 8, 2005 Report Share Posted May 8, 2005 Is it ok to use Green or Abbey ultra gas on the P99? any issues? how about a mix of green and 134a? thanks. Quote Link to post Share on other sites
Donut Posted May 8, 2005 Report Share Posted May 8, 2005 (edited) Sry, double post. Edited May 8, 2005 by Donut Quote Link to post Share on other sites
h_d_fen Posted June 1, 2005 Report Share Posted June 1, 2005 Have had mine for a few months now and find it to be VERY unreliable. i have had several stopages which have required me to strip it down to sort the problem. i also find that it performs very poorly in colder conditions. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.