kullwarrior

I don't think its that problem. In Taiwan good luck finding a real steel AK and don't even think about AKS74UN hk416, XM177 are all base of AR spec. Guess what? the CAD CNC file for AR-15 part is online. All WE need to do is build one make a CNC version and they go their mold ready. Those that are not available can be purchase and ship into Taiwan easily. In addition, Taiwan Army uses Type 91 which is basically an AR-18 (internal) and M4 (external) hybird, WE could get hands on of RS AR-15. The same is NOT true with AK This was kinda the same as A&K MASADA where they lack the actu

I don't understand.... If you use airsoft Taiwan and Paypal you get 10% off...but then again you live in the Peope's Democratice Supreme Awesome Republic of China

Because some mags and the feedlip wont accept the 32nd round. I find this to be very annoying, If you dont insert with the bolt lock to the rear you can damage to the nozzle when the mag is overfilled (kinda like H&K MP5 where the mag cap is actually 32, however, people only load 30 because manual say so (31, 32 will jam)

cwiairsoft in Taiwan is the only other known alternative to evike

Johnny told me the prototype is there, they just don't know if its profitable to market it. He says at the earliest (if there's enough demand) Christmas.

ra.ssh5915@msa.hinet.net This goes to the boss, Johnny

Just a note, RA-Tech already have a prototype WE G36 Steel Carrier, currently they're looking whether its feasible to go into mass production for it. My suggestion, if you are using steel trigger, ask about the We G36 Steel Carrier. If there's enough people, hopefully we can get the steel carrier going. As for the stutter in my case 3-4 pages back, I got the original parts, it's the firing pin itself being so worn.

With the whole gun... Airsoft Global

To answer for any potential people asking what issue does Open-Chamber have WE AWSS M4 known issue ->Ineffective Hop-up ->Feeding issue ->Firing Mechanism breaking (firing pin assembly, valve locker, hammer, trigger, disconnector) WE M4 Open Chamber ->Nozzle head breaking (When bb misfeed) ->Bolt Carrier wearing out (from using steel trigger or enhanced recoil kit) ->Firing mechanism breaking I would say WE Open Chamber is definitely better than AWSS, however the issue of nozzle breaking is the biggest concern, currently there's no fix than avoid using forwa

You didnt even answer my question. All you did was bashing RA-Tech. My problem is the bolt carrier, I suspect is the gas key. for the incompatibility. I'll be asking them when their holiday is over.

Does anyone here have the RA-Tech Steel Bolt Carrier installed? I got my custom RA-T WE M4, they didnt install it, I tried (installing nozzle was easy) but when I close the receiver, I can't pull the bolt back using charging handle for some reason. Anyone know the fix for this? I took down the stock, it didn't make a difference I took down the nozzle, it didn't make a difference I tried adjusting the height of the buffer retainer, didn't make a difference Removing the gas key and nozzle did allow the bolt carrier to be cycle

it is righty tighty...looking from the muzzle end.

according to US Army Manual, a bullet tip will do...though in reality more like a needle nose plier and a pin punch (punch to hold the pin down and plier to turn it)

I notice today when tried to dump my mag gas using the magwell and trigger grip (with the pin holding together) the hammer failed to dump the gas. This led me to suspect my hammer spring is too weak. Question, is the WE Hammer spring the same as Real Steel Ar-15 Spring? Is the WA Hammer Spring compatiable?

Yep, the wear on the firing pin and hammer is consistent with mine. The only difference is that mine has significantly more wear than yours

Reppybayo I think the reason why my gun is stuttering on full auto is the RA-Tech trigger parts specifically the Hammer and the Firing Pin. I notice the point between the hammer and the firing pin there are wear marks. Hammer has about 1/4mm indention where it strikes the firing pin. and the Firing pin looks like it has been wearing out. Regardless the trigger and disconnector looks new aside from the part will it contact with hammer or my finger.

Could you post picture of your RA-Tech G39 Trigger Part as well your Bolt Carrier I would like to compare it to my case.

WE NEVER EVER EVER EVER HAVE TRADE MARK ON THEIR GUN Those ones you see with real trademark (except EBR) are all AFC Custom

Question, my gun didn't come with the mag adapter for loading bb (the big plastic black block) Where do I get it? and How can I load the magazine without it?

I know it's the least compared to a lot of other ones... -M14 would destroy it self....to the point you need to replace everything -PDW would destroy receiver if the gas used has too high pressure propane @ 30C+ or CO2 -SCAR stock hinge would break in matter of shots -M4 bolt carrier would break (quite a lot of reports from Taiwan forum) However, my complaint is why can't RA-Tech just make a full firing mech all in high quality steel. The RA-T hammer (12k+) is already showing wear hitting the firing pin)

When I bought the G39 from them, they said it was the least problemanic WE rifle.... I guess they had way too high hopes for them.

Hmm exact symptom I have.... Hard kicking semi auto, occassionaly (1-5%) weak on semi Auto always stutter (ROF less than 500 for sure) and stop because auto sear did not trip The funny thing for me is some magazine I have you can fire fine on full auto others are semi auto only. I thought it was the magazine issue because I use Gasket Maker on all my mags to stop leaking. Did your problem resolve when you switch the trigger parts? (if so which parts?) I know my bolt carrier (both) looks pretty beat up, but it doesn't seem to hamper its performence. Need to keep pushing RA-Tech t

As I stated couple of pages back and other like myself had; shaving the prongs will increase FPS. It gives more space for the gas to go through.

Are you using the stock iron sight? Those are accurate, don't rely on them (unless you're shooting someone 2m away from you) The H nub will work, you need to make sure its center though. As for the moon shape thing damage, I did that to mine as well, I use super glue and it held up fine. What G36 are you running? the E? K? C? I have the E version and Stock rubber & nub hop up off was perfect trajectory for 0.2g, The G39 can overhop 0.40g if you turn it to the max (all the way CCW) On a note, I just got off with Johnny from RA-Tech, THEY GOT THE HANDGUARD KIT IN ST

The overhop issue is mostly because the stock sight is off. I used a laser bore, and it quickly shows even in 2m the elevation and windage is off.