Jump to content

Honzo

Regular Poster
  • Content Count

    364
  • Joined

  • Last visited

Everything posted by Honzo

  1. My front sight post is wobbly, how do i tighten it? There's no screws to tighten, I just see a push out pin to take the front sight post off of the gun. It wiggles and has play from side to side.
  2. Honzo

    Tokyo Marui M9A1

    thanks for the review, i was waiting for a good write up on this piece
  3. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    lol true. I'll still probably carry about 5 mid caps so i keep the muscle memory there but I would like a reliable high cap for emergencies!
  4. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    I'm wondering if the tokyo marui hi cap mag is, in general, higher quality and feeds better than the clone mag? I have an army 430 round sopmod mag but it doesnt feel as well as i would like. Has anyone had experience with both hi caps and if it's worth for me to buy the TM branded hi cap? P.S. carrying 7-8 mid caps throughout the day is wearing me down (not to mention reloading each one). I have some for sale if anyone in the U.S. is interested
  5. Honzo

    Initial Impressions of the TM PX4 GBB Pistol

    anyone know if these mags for the px4 are compatible with the TM beretta 92 or m9a1?
  6. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    Does eagle 6 still sell the 9.6 v quick change batteries for the sopmod? I was on the website and i can only find the lipo ones....
  7. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    Is it safe for me to use the sopmod stock configuration on a 9.6v battery? Will the stock marui last as long as an 8.4?
  8. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    my SOCOM had problems feeding and it seems like the nozzle was worn...no idea why it happened as I kept it in stock configuration. Didn't touch a single thing on it! Certain rounds wouldn't feed properly on semi. I've never had the upper taken apart from the lower on the socom. Didn't experience this with my sopmod however. I was using KSC .20g perfect. I ruled out the mag because when I finally decided to separate the upper and lower the nozzle had some "chips" so to speak... Still not exactly sure what happened
  9. Honzo

    KWA LM4 PTR GBB

    You're saying that you've spend 55$ on this rifle?
  10. Honzo

    KWA LM4 PTR GBB

    good thing i waited on this lm4 instead of buying it right away (i was really tempted). Time to move onto the marui gbb mp7!
  11. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    I'm trying to figure out my next ebb and i'm caught between the cqb R and the g36c. Only problem is, they are so similar in price which makes the g36c so unattractive since it seems the better value comes with the cqb R. Did anyone have loose stock tube problems with their cqb R? I had this problem with both of the TM sopmods ive owned but not as much with the TM SOCOM. I've used the AR wrench tool but the sopmod still comes loose. I Wonder if the CQB R will be the same issue with the mod stock.
  12. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    snoopy, those instructions scare me! Ive never tampered that much with the socom! Megalo, i think this may be the problem im experiencing. Any idea why this happens and how i can prevent it from happening? Will i have to open it up to fix this issue of the nozzle ? I'm not very savvy with these tech things! yet i call myself a sopmod owner, ugh!
  13. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    Thnks for the responses. Here are my replies: I have 4 different magazines and its been the same for every one. Never changed the barrel at all. Megalo, if the air nozzle is out of alignment what do i do? how can i check and what causes the air nozzle to be damaged and what would it look like? I've had about 5000 rounds down the pipe through this one as the original owner thanks everyone!
  14. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    my socom m4 has started to have feeding issues again! Why does it happen?! i bought it brand new and never opened the gearbox! I remember druid mentioned a few months ago to re assembly the barrel and the problem goes away. What now>!!?! It feeds fine on full auto but on semi it skips or does not feed at all
  15. nice scarH and that camera quality is nice.. what kind of camera is that?
  16. Clearing it using full auto when it locks on semi is a common problem (even in non-recoil aegs). Just use deliberate trigger pulls on semi. Sometimes it forgives you when you press semi a little frequently but it's not too much a big deal. congrats on the purchases!
  17. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    Soupdate to my problem with the weird feeding issues (it didnt feed on semi but it fed on auto). I ordered a freedom art mag pipe and each BB fed flawlessly! (both on semi and on auto). I am happy with the adapter because now i can use my pmags!!!!
  18. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    druid, i tried your method first since it was more simple but no fix! Ill look into the gearbox during the weekend when I have more time like TK recommended. Any other ideas till then, let me know! and thanks for the replies! if anything, i'll just shoot it on automatic
  19. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    It's strange because when i shoot it on full auto, all the BBs fed. But on semi, it tends to skip or not feed. And i tested on 4 different sopmod mags. Same problem. I really dont want to take it apart though lol i might mess it up more than it is now.
  20. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    So I've been shooting my SOCOM for a few months now. One thing that happened recently are mis-feedings. Sometimes the Bb would not feed at all or I would have to shoot it five times in semi for it to finally feed and shoot out the BB from the magazine. Any reason why this started happening? Other times it would feed every BB, other times it would feed every other one, and on ocassion it would feed every 3-4 BBs. Socom has been left pristine stock, no mods done to it. Used good BBs 0.20g and the TM sopmod magazines. Thoughts? Thanks in advance like always
  21. No one has gotten the scar H yet so provide us some pics? or are you guys waiting for the tan?
  22. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    Happens to me all the time (not just the socom but other recoil aegs and also regular aegs). I used 8.4v its not a big deal though. just the nature of the gearbox that causes it
  23. Honzo

    Initial Impressions of the TM SOPMOD M4 AEG

    The sopmod metal feels solid to me. it cant be used of the same pot metal used for cheaper guns?!
  24. So i was moving boxes and i saw the TM scar L box in the closet. One thing that i did not notice before is that you see, on the side, three flags (countries) then it says "next generation aeg". I see a US flag, japan, and china. obviously, they have a japan flag since it's japanese made. I guess the american is there because of the rifle itself being US socom based. Where does the china flag fit in? Just curious
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.