Theoutlier
Regular Poster-
Content Count
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by Theoutlier
-
You can order it at either Ratech's website, EBairsoft, BBdragon (the latter is the cheapest I found)
-
So I guess its worth the money? I'm planning on buying it too since I've owned like 3 WE GBBRs and hoping they might share some parts compatibility. Is it a trigger box like their M4 varients? (Another thing I'm really curious about is whether or not it accepts PTS Masada furnitures, if so I would get this gun in a heart beat)
-
FMA GPNVG-18 Replica (Zero Dark Thirty)
Theoutlier replied to Theoutlier's topic in Tactical Equipment and Accessories
^Thats pretty much the best way to put it, lol- 6 replies
-
- FMA
- Zero dark thirty
-
(and 2 more)
Tagged with:
-
I have also posted a video on Youtube, dont forget to go check it out: This is also my first time writing on Arnies, so bear with me. So, like everyonelse I was really excited when the dummy version was announced (admit it, you watched 0Dark30 and got geargasm over this). I had decided to order one just to see how it looks on my helmet (plus its only 50$, that cant hurt). I think everybody has them by now since its Sold-out pretty quickly. However, I see there arent that many reviews on the net, so I took the liberty to do some review on it. I will go over some pictures, modifications, bu
- 6 replies
-
- FMA
- Zero dark thirty
-
(and 2 more)
Tagged with:
-
Its definitely to do with the design of REAPs (gen2), I had mine on once and the same thing happened. I believe the problem is that the bucking doesnt have this tab thats supposed to sit on the chamber so it doesnt stay properly. Just stay away from them and u will be fine (I recommend using Ra-tech Hops, works great and i put them in all my WE GBBR)
-
its a rounded 2mm diatmeter oring.ofcourse its gonna be difficult to install, but i used the special kind of adhesive (same kind i used to glue the 2 ends of the oring chords together)But i guess u can use super glue?. Few drops of those on the backplate and it stays in place. I also have heard some pple with good result on a 1.5 mm ones. so i suggest u try different sizes. Also to help with the installation, always use superlube on the orings and cclamps to hold the mag together. i tried using bare silicone gaskets and had a horrendous results. But it does good job if u already have
-
I ve had many leaks from m4 mag. Mostly from the main seal ,Not only that there is more chance of leakage but also orings Are very prone to splitting up( epic Design fail.rlly). So I developed my Own way to remedy this problem. Instead of ordering the same oring as a replacement. Buy a proper industrial orings of 2 mm diameters (they r sold in metres In my country)replace the old 1 with those, cause they r MUCH tougher add some lube and its all set. Mine have had no Single leak since then. U can also try some mods, (there are plenty of em) , Gd luck
-
1. remove Upper from lower 2. take out the bolt 3. look inside, it is a tiny key-hole located just above the Hop-up chamber.
-
One uber massive Costa action figure lying next to the real man.
Theoutlier commented on TheFull9's gallery image in Member's Gallery
-
nice one @kullwarrior!!! just put a shim on mine, catch wobbles no more
-
Yep, it works fine now. i filed out some portions of the catch, it nows contact the bolt good. though i have yet to purchase shims, but im pretty sure it would work okay for now. I have also found a mod that works for me so basically if anyone have a problem like "bolt doesnt lock-back on last round " or "bolt locks back when there are still rounds in the mag" then i can almost gurantee its the problem with the spring This can be fixed by stretching the catch spring and/or pushing it down till it stretches or gets thinner. becareful not to over do it though, or you will break the
-
thx kullwarrior for your advice, however, after the close inspection at the boltcatch area, it seems like the bolt carrier is only engaging it at the top bit No wonder why its worned out so much, since so much force is applied on the small area i might try to file the tab that contacts the upper receiver so the catch could go up further btw, how do you find the RA-steel bolt? would it work with stock trigger groups? if not then may i ask what upgrades are you running on?
-
hey guys I too am the owner of we m4, after 1000 or so rounds- it seems to still operate fine, However the only part that i always have the problem with is The BOLT STOP. it seems to be taking alot of damages from the stock bolts to the pont its splitting up!!! (slightly). Im so scared of how worse it would get once i get the RAtech Steel carrier is there any mod to decrease the impact between the catch and the carrier? (besides not using the function ofcourse ) and in your experience, what other major parts would break first? (im talking abt nozzle/trigger group parts) Im