Zereck
-
Content Count
650 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by Zereck
-
I have installed the Z-parts trigger kit and got a small problem since then. Semi works fine but when I switch to full auto and press the trigger it shoots only once. It feels like the bolt maybe stuck or the hammer is not in the correct position when I try to pull the trigger again. Once I pull back the charging handle it shoots fine tough. :/
-
Well I was chronoing my gun(the gun's FPS was very inconsistent(even for a gbb). it was usually 1j but then the next shot could be 0.9 to 1.3j) when a gun did a burst(well it was more like 2 fast trigger pulls) and I could no longer shoot. I heard rattling inside the gun and after shaking them out there was a BB and a broken part of part #22: http://imgur.com/a/WzKBa Kind of unlucky with this gun.
-
You were right the pin was bent: http://imgur.com/peAZ6HK I tought at least the pins are made of stronger material. I haven't even used mine that much. Oh well at least I know the issue now, thanks for the help.
-
Sorry I had really sh*tty internet today. Tried to take some pics don't know if you will see anything on them: http://imgur.com/a/86cVY
-
Yeah I was wrong even without the trigger bar the issue is happening. What I noticed is that if I slowly pull and release the charging handle the issue won't happen but that's not very useful of course.
-
Ok so the issue was actually the trigger bar itself not resetting and not the spacer. http://imgur.com/a/LQWVa First picture before trigger pull secoind is after. This is on semi. On full auto it resets correctly unless I release the trigger very slowly.
-
Hmm I put a spacer on the part 66(the trigger bar) and it seems when i push the trigger pack back in it presses on enough to engage the hammer. Im gonna try without a spacer, tough it is a bit weird as it was the same for a time now and the issue only started recently. By the way the spacer was just a few rounds of electrical tape around the trigger bar.
-
There is absolutely no slack.
-
http://imgur.com/a/lKWQ4 First picture shows exactly how it was after I took it out of the gun. I could push it down further and it would stay there on the second picture.
-
I have this wierd issue. At first semi would sometimes not work at first I tought it was a magazine issue but then it started happening more frenquently. Then even full-auto stopped working. When I tried to disassemble I pulled the charging handle back, took off the upper and when I tried to take the bolt out I couldn't. I noticed that the hammer was still in forward position. FPS seemed to be lower than usual at the last chronoing btw. Now I took out everything and looked over but nothing seems to be broken... so I don't know what's going on. :S Edit: so I was just pulling back the charg
-
1. It shouldn't. But this gun has a pretty wild recoil. 2. That happens on mine too, tough it can be only fired once if you put it in safe again. I assume it is due to the mod I did on the hammer which makes semi trigger pulls better(altough rarely I get a 2 round burst on semi).
-
Is that the back part of the frame? As in the part which under your hand goes?
-
What's up with the costs on Kyairsoft? A bolt is 220$ and the upper is 412.50$!
-
There is this but I have no idea how much work does it take to install.
-
Yes. It would have been nice to see how much ammo you have and/or put a bullet sticker inside.
-
Remember how I said that you need to hit the magazine to fully seat in the magwell? Well don't do it: I noticed that I could not get the mag out after the mag release button and when it finally came out that small part fell out. It's part of the magazine shell right in front of the feed lip. The front mag catch part also broke altough not entirely at first. Both places are pretty thin so if you are inserting a magazine and it doesn't click just keep pushing, don't hit it. By the way even with those part broken off the magazine catches inside the magwell perfectly, no movement at all.
-
As I mentioned above it is very light, my scale showed only 409g with a small amount of gas in it. After trying to load with BBs a few times I can say that the spring is way too stiff. After around 16-18 BBs I could not load anymore with the added speedloader.
-
So it seems Im one of the first to get the new GHK baby so I figured I give a small review/impression. 1. Packaging I usually don't bother with it however the packaging wasn't the best. The gun was clearly rocking back and forth in its case, there were small foam pieces everywhere. But the worst part was that the flash hider was damaged: Thankfuly nothing else was damaged but Samoon should put something in the front part to prevent anything similar in the future. The gun and the magazine comes with the usual GHK stuff: speed loader, silicone oil, spare o-rings and pencils.
-
So I just got this toy for myself and I already noticed the bad trigger pull on semi. What my problem really is that I can't seem to adjust the hop-up. The hex key that came with the gun will not catch on the grub screw that allows the adjustment of the hop-up no matter how I tried to insert. I also tried different sizes of keys but no sell. I looked in the hole but could not tell if there is even a screw in there. Will disassemble soon but tought I would ask if anyone had any similar experiences.
-
I mentioned in a previous post that my bbs randomly over or underhop. And yes the FPS will fluctuate somewhat but not that much(+-40 to 50). By the way the inner tank's valve that connects to the magazine leaks slightly.
-
So I tried multiple barrels, hop-up rubbers and nubs and still got the same results, so I chronod a whole mag down. Most of the shots were around 345-360 but then there were some random spikes: 310, 380, 390 etc. Nozzle seems fine, I hope it's not the inner tank's valve fault.
-
I installed an Angry gun inner barrel(old style cut) and tried a Maple Leaf and Modify rubber. With both rubbers I get usually good results on WE/TM guns but on this gun it randomly does too much/less hop-up. Anyone with similar issues?
-
Both this and the P-09 look nice but their proprietary hop-up scares me off to buy them.
-
Suprisingly hard to find actually. I only found some american shops but I don't want to order from there. The gun was hanging by the sling on me when the sling came off and the gun landed head first on concrete. The entire thread broke off of the gun.
-
I hope they put up more parts because I lost my entire flash hider.
