Jump to content

JT SANBORN

Members
  • Content Count

    34
  • Joined

  • Last visited

About JT SANBORN

  • Rank
    Adv Member

Additional Information

  • Airsofter since
    2010
  • Country
    United States
  1. JT SANBORN

    KJW M4

    That's exactly what I've done to mine. Now, I'm wobble free
  2. JT SANBORN

    KJW M4

    There she is!
  3. JT SANBORN

    KJW M4

    Yeah my old one cracked in that same spot too! I used eproxy and super gorilla glue to fixed it, but after 150-200 rounds the glue came off. I end up buying the complete V1+ from Cradle for $160. The best solution is, try to order a new loading nozzle directly from Cradle.But I'm not sure if they'll sell you just the nozzle. Good luck!
  4. JT SANBORN

    KJW M4

    I finally done upgrading my KJW. Cradle V1+ BCG 363mm Falcon TBB Falcon Hopup Bucking Magpul CTR stock Tactical Green Laser 1800LM Cree Tactical Flashlight
  5. JT SANBORN

    Me and my sweet KJW M4

  6. JT SANBORN

    KJW M4

    After testing my new V1+ BCG last Saturday, some of my mags seems not kicking enough or not released enough gas when I pulled the trigger. But when I pushed the mag up into the magwell and hold it with my hand, seems like I got better strike. But when I let go, the kicking reduced. Well last Sunday I decided to disassembly all my 9 mags and let the O-rings, seals and the valves sited in silicon oil for a day. After cleaning all the dirt and put everything back together, all my 9 mags works like brand new again without hold them with my hand. Better kicked and I can feel the recoil increased. I attach a couple pictures of everything I remove out of the mags. BTW, these mags are very easy to disassembly and reassembly. Cheer
  7. JT SANBORN

    KJW M4

    A few pictures I took last Saturday after testing the new Cradle V1+ BCG.
  8. JT SANBORN

    KJW M4

    I took my KJW out on the field last weekend.
  9. JT SANBORN

    KJW M4

    Well, I order my V1+ BCG last week hopefully it works for my V1 KJW.
  10. JT SANBORN

    KJW M4

    Can somebody post a review or a video about the Cradle V1+ Bolt Carrier Group? That would've been great.
  11. JT SANBORN

    KJW M4

    Meanwhile here's a few pictures of me with my KJW M4. BTW I like my rifle dusty and simple.
  12. JT SANBORN

    KJW M4

    Yes this one should fit in the KJW. Also if you seems can't found it in "Foliage Green" anywhere, I will suggest you to spray paint it. Check this one out. http://www.ebay.com/itm/Magpul-MOE-grip-any-color-MAG415-BLK-or-MAG415-FOL-/330864949878?pt=LH_DefaultDomain_0&hash=item4d09167a76
  13. JT SANBORN

    KJW M4

    Thanks for the update Cj and keep us posted.
  14. JT SANBORN

    KJW M4

    I had the same problem before where the magazine don't released enough gas to push the bolt back and after a couple shots the gun stopped cycle. It was my hammer spring that was messed up and the valve knocker wasn't working properly cause of dirts. After I replaced the hammer spring, cleaned and greased the valve knocker. The gun back working to normal. Oh in another note; make sure your magazine is not too loose in the magwell. That might cause your problem though. Push the magazine up into the magwell, hold it with your hand and fire a couple shots on semi to see what happen. Good luck...
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.