-
Content Count
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by JT SANBORN
-
That's exactly what I've done to mine. Now, I'm wobble free
-
Yeah my old one cracked in that same spot too! I used eproxy and super gorilla glue to fixed it, but after 150-200 rounds the glue came off. I end up buying the complete V1+ from Cradle for $160. The best solution is, try to order a new loading nozzle directly from Cradle.But I'm not sure if they'll sell you just the nozzle. Good luck!
-
I finally done upgrading my KJW. Cradle V1+ BCG 363mm Falcon TBB Falcon Hopup Bucking Magpul CTR stock Tactical Green Laser 1800LM Cree Tactical Flashlight
-
After testing my new V1+ BCG last Saturday, some of my mags seems not kicking enough or not released enough gas when I pulled the trigger. But when I pushed the mag up into the magwell and hold it with my hand, seems like I got better strike. But when I let go, the kicking reduced. Well last Sunday I decided to disassembly all my 9 mags and let the O-rings, seals and the valves sited in silicon oil for a day. After cleaning all the dirt and put everything back together, all my 9 mags works like brand new again without hold them with my hand. Better kicked and I can feel the r
-
A few pictures I took last Saturday after testing the new Cradle V1+ BCG.
-
I took my KJW out on the field last weekend.
-
Well, I order my V1+ BCG last week hopefully it works for my V1 KJW.
-
Can somebody post a review or a video about the Cradle V1+ Bolt Carrier Group? That would've been great.
-
Meanwhile here's a few pictures of me with my KJW M4. BTW I like my rifle dusty and simple.
-
Yes this one should fit in the KJW. Also if you seems can't found it in "Foliage Green" anywhere, I will suggest you to spray paint it. Check this one out. http://www.ebay.com/itm/Magpul-MOE-grip-any-color-MAG415-BLK-or-MAG415-FOL-/330864949878?pt=LH_DefaultDomain_0&hash=item4d09167a76
-
Take Note guys!
-
Thanks for the update Cj and keep us posted.
-
I had the same problem before where the magazine don't released enough gas to push the bolt back and after a couple shots the gun stopped cycle. It was my hammer spring that was messed up and the valve knocker wasn't working properly cause of dirts. After I replaced the hammer spring, cleaned and greased the valve knocker. The gun back working to normal. Oh in another note; make sure your magazine is not too loose in the magwell. That might cause your problem though. Push the magazine up into the magwell, hold it with your hand and fire a couple shots on semi to see what happen. Good luc
-
I guess I will wait for yours T.
-
I'm going to contact KJW directly tonight to see if they have any in stock.
-
I can't find where to post this. Anyway I'm willing to trade my KJ V2 Bolt set for a V1 Bolt set. Pm me if you're interested.