Renalan Posted March 26, 2008 Report Share Posted March 26, 2008 I got my hands on a WA GSR today. I was messing around with it then I fired it and no BBs are being shot. The blowback is very crisp. I tried a Kimber slide on it and nothing. It's a SCW 3. Link to post Share on other sites
ViciousV10s Posted March 26, 2008 Report Share Posted March 26, 2008 I got my hands on a WA GSR today. I was messing around with it then I fired it and no BBs are being shot. The blowback is very crisp. I tried a Kimber slide on it and nothing. It's a SCW 3. Sounds like the floating valve is stuck or broken. You should take apart the loading nozzle to find out. Link to post Share on other sites
Renalan Posted March 26, 2008 Author Report Share Posted March 26, 2008 It seems like you hit the problem right on the head. Now, I have been trying to pry this damn blowback mech out for the last 30 minutes. Any tips? The rear sight doesn't have to be removed first, does it? Link to post Share on other sites
junior Posted March 26, 2008 Report Share Posted March 26, 2008 Try gently spreading the slide apart with your hands. It's really a pain in the rear to get the BBU out of the plastic slides. Link to post Share on other sites
hkssr20det Posted March 26, 2008 Report Share Posted March 26, 2008 I use a thin screwdriver to "pop" one side before working on the other. Apply gentle, consistent pressure to the top of the loading nozzle (make sure it is fully retracted) while you do this. PITA, but go slowly and consistently and it will come out. Link to post Share on other sites
Renalan Posted March 26, 2008 Author Report Share Posted March 26, 2008 Okay, I got the thing apart, now how do I take the floating valve out of the loading nozzle? -The problem is the floating valve seems to be stuck. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.