Armourpiercing Posted July 11, 2009 Report Share Posted July 11, 2009 So here it is, the next GBB in my cabinet to get the chop. It's a full metal M9 by KJW, no trademarks, TM copy so will be an excellent donor to pimp your plastic or tatty M9. Compatable with TM/KJW/Bell/HFC etc etc. It's Stainless - this is not a cheap sanded down black gun, this comes stainless from the factory with a nice nickel look to it. It lacks the right hand safety but is otherwise complete. You absolutely cannot get these any longer - they were a limited run. Lot 1, Top half - everything included. £50 posted & paypalled. Lot 2, Lower half - everything included with upgraded hammer spring installed. £50 posted & paypalled. Lot 3, stainless mag - full working order, no leaks. £15 posted & paypalled. Pics later. AP. Link to post Share on other sites
Armourpiercing Posted July 14, 2009 Author Report Share Posted July 14, 2009 Lot 1, Top half - everything included. REDUCED £47 posted & paypalled. Lot 2, Lower half - everything included with upgraded hammer spring installed. REDUCED £47 posted & paypalled. Lot 3, stainless mag - full working order, no leaks. £15 posted & paypalled. AP. Link to post Share on other sites
AirsoftAddict Posted July 14, 2009 Report Share Posted July 14, 2009 any pics?? just to see the stainlessness of the GBB Link to post Share on other sites
Armourpiercing Posted July 20, 2009 Author Report Share Posted July 20, 2009 Doing it now peeps... Ohh - within edit time! Score! M9 on my web page. Notes:- it has regular M9 grips on now NOT the crappy Vertec ones shown in picture & the top hals looks to have an upgraded recoil spring - it feels to hit home harder than my standard KJW M9 & is a tiny bit longer. It's not like a TM M9 stainless finish in brightness & its a bit better in effect than the WA/Ksc style stainless. It's more Nickel so looks very purdy! There are tiny marks to the finish on the slide sides but they are so fine i can't get a picture of them! Usual wear alonf the front lower of the slide from usual cycling & around the take down catch but again, unavoidable. Mag is under offer. Edit further! I'll do both upper & lower for £90 all in. AP. Link to post Share on other sites
Armourpiercing Posted July 25, 2009 Author Report Share Posted July 25, 2009 Video of it can be found I thought i added the video link before but must have forgot! I will accept swaps by way of AK parts but i'm being specific in what i want... all must be MINT! No wear & tear & no 'aged look'. * I need most LCT or Inokatsu or RMW steel AK parts be it body, stock, front end etc. * Any make of really nice wood kits for the TM versions most welcome, no ACM. * Complete Dboys AK front ends for any model AK except the short AK104 style. If the body, top cover or selector switch parts are not by LCT, Inokatsu or RMW i'm not interested. Link to post Share on other sites
Crimson Posted July 28, 2009 Report Share Posted July 28, 2009 If you include the mag in the £90 deal i will have the gun today payment via bank or paypal Link to post Share on other sites
Armourpiercing Posted July 28, 2009 Author Report Share Posted July 28, 2009 Mag now £8 - top seal needs relacing, still works but is missing the engine by a fraction of a mm! PM inbound to crimson. AP. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.