AG1212 Posted December 15, 2010 Report Share Posted December 15, 2010 Does anyone know if or where I can get a metal upper receiver for an S-System? my upper cracked Link to post Share on other sites
gijohn2 Posted December 17, 2010 Report Share Posted December 17, 2010 You cant any more , airsoft GI had some but that was ages ago and they cost loads =/ The only way is to replace the outer barrel , New receiver and find a way to attach the S-system front end to the barrel (2 tabs which the front part screws into) and attach the long upper rail to the upper receiver as it jt screws onto the JG upper and does not clamp like Dboys or ICS etc , A bit of modifying would be needed Hope this helps Link to post Share on other sites
T3CH Posted December 18, 2010 Report Share Posted December 18, 2010 there used to be a kit for marui s-systems to let you use a metal receiver, not sure if it will work for a jg one tho? http://www.cobraairsoft.com/product_info.php?products_id=2536&osCsid=f5f6e0a0dda082726c2efb44f8d21530 btw searching for that has just found me a few things I've been looking for Link to post Share on other sites
druid799 Posted December 18, 2010 Report Share Posted December 18, 2010 you can change the plastic receiver on your S-System for another plastic one (i did) get your self an M4 receiver then CARFULY loosen and swap the metal retaining rings from the front of each of the receivers , fix the new one on with some epoxy and job done . Link to post Share on other sites
AG1212 Posted December 19, 2010 Author Report Share Posted December 19, 2010 I'm a bit confused, the top receiver for the s-system is missing the top/rail, so I would have to somehow remover this? and the front of the receiver too? Maybe an easier solution would be to either glue ( thats what I did originally but it didn't hold up ) or find a parts bin S-System. Thanks. Link to post Share on other sites
AG1212 Posted December 19, 2010 Author Report Share Posted December 19, 2010 I'm a bit confused, the upper receiver for the s-system is missing the top/rail, so I would have to somehow remove this? and I will have to modify the front of the receiver too? Maybe an easier solution would be to either glue ( thats what I did originally but it didn't hold up ) or find a parts bin S-System. Thanks. Link to post Share on other sites
gijohn2 Posted December 19, 2010 Report Share Posted December 19, 2010 Ok , http://picasaweb.google.com/gijohn2142/DropBox?authkey=Gv1sRgCKfuntvVoOuF-gE#5543990685817090050 That is a JG M4A1/S-system upper , As you can see it attaches to the out barrel differently unlike the conventional delta screw ring, The top rail slots into two plastic tabs (not in picture because they snapped off) and then you screw the top rail onto the charging handle block . You could glue it the front rail system and long upper rail (Of the S-System) onto a metal body but im not sure how secure that would be =/ Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.