uscmCorps Posted July 5, 2012 Report Share Posted July 5, 2012 Hey guys, Living in the US, I have the option to buy real parts for guns. One thing I've always been fuzzy on is what real steel Glock parts, if any, are compatible with TM Glocks, and KSC/KWA Glocks? I'm mostly curious about parts such as replacement iron sights, slide releases, mag releases, mag base plates, etc. I've got several TM Glocks, KSC/KWA Glocks, and KWA ATPs. I've upgraded a few of them with aftermarket airsoft parts, and I'm really thankful that companies like GunsModify have produced some awesome tritium sights for the TM Glock. Especially in light of the fact that the rear TM Glock sight is unique in design to the TM platform. If compatible, I'd like to further upgrade my various guns. Thanks Link to post Share on other sites
aznriptide859 Posted July 7, 2012 Report Share Posted July 7, 2012 This is for KWA/KSC. Slide release: will work, but you need to enlargen the hole (since the KSC Glock has that brass bushing over it). Mag release: 100% drop in. Slide lock lever: 100% drop in Sights: 100% drop in for me (used stock sights), may differ for other types Magwells: Mostly drop in, some frames might be too thick for some magwells Link to post Share on other sites
k30dxedle Posted July 9, 2012 Report Share Posted July 9, 2012 Good to know that RS slide stops fit on KSC/KWAs, I've been looking at one of the Vickers Tactical ones - the slide stop is really the only thing I have trouble with on Glocks - and they're cheap, too. Link to post Share on other sites
Vuddha Posted July 11, 2012 Report Share Posted July 11, 2012 Even though I don't have or feel the need for a glock, threads like these are awesome for guys stateside, where some of the cooler replacement airsoft stuff can be hard to get. Most of my real stuff is limited to lights and mounts, although I have a Vltor modstock that I modded (minimally) to fit a 9.6 2100 mah battery, and a QD M203 barrel latch Link to post Share on other sites
uscmCorps Posted July 15, 2012 Author Report Share Posted July 15, 2012 This is for KWA/KSC. Slide release: will work, but you need to enlargen the hole (since the KSC Glock has that brass bushing over it). Mag release: 100% drop in. Slide lock lever: 100% drop in Sights: 100% drop in for me (used stock sights), may differ for other types Magwells: Mostly drop in, some frames might be too thick for some magwells Thanks a lot aznriptide! This has been very helpful. I ordered some parts for my KSC Glock. Today I received my 10-8Performance sights which I've always really liked on my RS guns. The front sight went in easily, and thanks to the screw is solidly in place. The rear sight however was very loose during the initial install and using the included set screw, actually raised the rear sight too much (there's THAT much additional space in the dovetail. I could use super glue (and I still may) but what I'll try later tonight is cutting some thin sheets of plastic to act as spacers. Once I have a nice and tight fit into the dovetail I'll just use the set screw to hold it in place and stop it from drifting. I've also ordered some other parts which (annoyingly) won't arrive till Monday. I've ordered the Vickers enhanced slide release (which was something I've been looking forward to trying since posting this thread) and some Vickers mag bases. Curious to see if the mag bases will work. If not I'll just use them on my real gun instead. But so far I'm totally stoked about the sights. It really has enhanced the look of the gun as well as made picking up targets quicker. I wish the KWA ATP would accepts the same sights. Gonna have to test that out. The front sight on the ATP however uses a dovetail for the install rather than the hole cut-out in the slide like on the Glock's front sight. Link to post Share on other sites
dannyeprice23 Posted July 15, 2012 Report Share Posted July 15, 2012 Pictures when all arrives please Link to post Share on other sites
Vuddha Posted July 16, 2012 Report Share Posted July 16, 2012 I've used aluminum flashing to space out real steel night sights on my USP. You can buy it at Home Depot in spools or in a pre-cut flat pack of like 25 pieces. I've used it to make all sorts of stuff for my airsoft stuff. -Vu Link to post Share on other sites
uscmCorps Posted July 16, 2012 Author Report Share Posted July 16, 2012 I had to run around doing errands today or I'd head over to HomeDepot to get supplies. I got annoyed at the prospect of the gun not being finished so I grabbed some white styrene sheets I have in various thicknesses and cut a thin strip to act as a spacer. It helped a lot. Not perfect though as I'd like a truly tight fit before using the included set screw, so I'll give it another go later today. Link to post Share on other sites
Vuddha Posted July 16, 2012 Report Share Posted July 16, 2012 I had to hammer my front sight in with a mallet! The stuff I use came in a plastic pouch with 25 sheets, they are much easier to work with since they are flat and not in spools. If it is too thick, you can dremel sand it down to the right thickness. Good luck with your build, I hope you post pictures! -Vu Link to post Share on other sites
uscmCorps Posted July 17, 2012 Author Report Share Posted July 17, 2012 Update #1. This evening I installed the Vickers Enhanced Slide Release into my KSC G17. The install was okay. The harder part was taking the Glock apart. I'm much more familiar with TM G17's than I am with KSC G17's, so I had to look up a couple disassembly videos on youTube which helped a lot. Once I figured that out, all that was needed for the install was to enlarge the hole in the Vickers Slide Release. Not too hard. The function of the slide release is just as reliable as the OEM. And it looks bad *albatross*! Update #2. The Vickers base pads also arrived. They are not compatible with any airsoft Glock that I had on hand (KSC/KWA/TM/WE/HK3P). Curious if Madbull will come out with a TM/WE compatible version since they have the Vickers airsoft license. Link to post Share on other sites
aznriptide859 Posted July 17, 2012 Report Share Posted July 17, 2012 Unfortunately baseplates are not compatible with RS - you have to use airsoft-designed ones. Link to post Share on other sites
uscmCorps Posted July 17, 2012 Author Report Share Posted July 17, 2012 *sad face* Oh well. Took some quick pics with my phone last night after installing the Vickers Slide Release: Waiting on the Vickers Mag Release to come in. Gonna install a Vickers Slide Release on one of my ATPs as well. Link to post Share on other sites
Vuddha Posted July 18, 2012 Report Share Posted July 18, 2012 I'm not a stippling fan or a Glock fan AT ALL, but your Glock is done right! That slide release is easy to miss if you're not looking for it, but I bet it makes a world of a difference when it's used, good job! -Vu Link to post Share on other sites
uscmCorps Posted July 19, 2012 Author Report Share Posted July 19, 2012 Thanks! The stippling on this Glock was actually my first attempt on a polymer frame. I've done over a dozen frames since and the end result looks and feels far better than the one depicted here. So, I like this slide release a lot more than the GunsModify type ones since I find those are easier to accidentally engage when shooting the gun. This slide release is extended outwards just enough that it's easier to disengage but not so easy as to prematurely engage it mid-mag. Received the Vickers enhanced magazine release. It was a perfect drop in fit into the KSC G17. Doesn't look any different than the OEM mag release, but it sticks out just a little bit further making it easier to release without having to break your grip and also not so extended as to prematurely release the mag before you want to. I'm about done with the mods. Quite pleased so far. I'm curious to see if the RS slide release and mag release will work in a TM Glock. Here's a pic of the RS 10-8 sights installed in the KSC Glock: Link to post Share on other sites
jkpics Posted August 10, 2012 Report Share Posted August 10, 2012 I just spend 300 USD because of this thread, I will post pics of my glock 19 when it's all dressed up with RS parts and big dots. Link to post Share on other sites
uscmCorps Posted August 11, 2012 Author Report Share Posted August 11, 2012 FYI, Glock rear sights also work in the KWA ATP (but need to be shimmed like KSC/KWA Glocks). 10-8 Performance Rear Sights: Also, while the KWA ATP won't take a Glock front sight (since ATP's use a dovetail for the front sight) it will accept real M&P front sights. You might have to super glue it in place though since there's no set screw for the front sight and the channel is *slightly* too wide (like the rear). I have chosen to leave the front sight alone since it was mostly the rear OEM sight that bugged me. Link to post Share on other sites
Scuffer Posted November 19, 2012 Report Share Posted November 19, 2012 Guy wonder if anybody here can help. I want to fit a RS extended slide release to a KWA Glock 17. Which of these two options will fit; Glock Extended Release 2-pin model or Glock Extended Release 3-pin model? I have no issues making mods, but I'm looking for the best drop in fit. Thanks Link to post Share on other sites
uscmCorps Posted November 19, 2012 Author Report Share Posted November 19, 2012 Scuffer, in RS, the 2-pin Glocks were the models prior to the Gen 3 Glocks. Glocks that were Gen 3 and beyond were all 3-pin models. AFAIK, the KWA Glock 17 was patterned after the Gen 3 glock, so that 3-pin Extended Slide Release you're looking at should fit the bill. That said, you may be able to save yourself a bit of coin and get the 2 pin version and grind off that small extended vertical part specific to the 2 pin slide release as the two versions look very close, but no guarantees. Regardless, you're going to have to widen that pivot hole to match the KWA/KSC one. Link to post Share on other sites
Scuffer Posted November 19, 2012 Report Share Posted November 19, 2012 Cheers for that mate, was hoping you or somebody else with both RS and airsoft experience (and having combined RS parts with airsoft) would be along to help me out. For the sake of a few quid and the effort of grinding the fin off I'll get the 3 pin version. I read about widening the pivot hole in the above posts in this thread, is it simply a case of widening the hole by a few mm? While I've got you, any suggestions/knowledge on which grip extensions/adapters fit KWA and any brand suggestions? Link to post Share on other sites
aznriptide859 Posted November 20, 2012 Report Share Posted November 20, 2012 Grip extensions? Do you mean the plug hole behind the magwell? Link to post Share on other sites
Scuffer Posted November 20, 2012 Report Share Posted November 20, 2012 No sorry, I mean one of the beavertail grip add-ons like the Grip Force one. Link to post Share on other sites
uscmCorps Posted November 20, 2012 Author Report Share Posted November 20, 2012 It's a pretty significant widening of the hole and the thinnest edge of the hole gets pretty thin, but since it's hardened steel it is still more than strong enough for our needs. I just use a dremel with a tappered chainsaw sharpening attachment. I gradually push the dremel bit in and widen the hole. It'll chew up the grinding stone a bit but it's a little easier than gradually using drill bits against hardened steel. I then take a small round file and clean up the edges. You use the original slide release lever's hole and pin to judge how much to take off. Not too hard and pretty self explanatory when you have the KWA and RS parts in hand for comparison. You'll also want to do a function check once you've got the hole drilled. The part of the lever that is engaged by the magazine follower may need to be filed ever so slightly to ensure there's no binding. It varies. Not sure about grip extensions and adapters. I would inquire about that in the Glock pic thread. Link to post Share on other sites
Scuffer Posted November 20, 2012 Report Share Posted November 20, 2012 Roger that, cheers again for the help. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.