kickasspartan117 Posted March 30, 2006 Report Share Posted March 30, 2006 So basicaly I striped the little screw in the mag catch for my m733 commando, I have no idea how to get the thing off. Any help, I also need a replacement screw or a new magazine catch. Will this work with my TM gun, it says ICS but I thought they were pretty universal. Could I get the little screw at OSH or somewhere like that? thanks for any help. Link to post Share on other sites
airsofter138 Posted March 30, 2006 Report Share Posted March 30, 2006 I had the same problem, on my CA m15a4, I used a dremal and cut a little slit in it, and screwed it out.* sorry about the first post Link to post Share on other sites
airsofter138 Posted March 30, 2006 Report Share Posted March 30, 2006 I had the same problem, on my CA m15a4, I used a dremal and cut a little slit in it, and unscrewed it out. Link to post Share on other sites
Tom Andrews Posted March 30, 2006 Report Share Posted March 30, 2006 I had the same problem, on my CA m15a4, I used a dremal and cut a little slit in it, and unscrewed it out. <{POST_SNAPBACK}> Alternatively use a Dremel to drill out the head of the bolt, remove the button and use a pair of pliers to remove the remaining stub of thread. Done carefully this shouldn't cause any damage and you can replace the broken screw with a 12ba bolt. Link to post Share on other sites
DanHS Posted March 30, 2006 Report Share Posted March 30, 2006 Same thing happened to me, I sat there forever with a tiny carbon steel screwdriver and carved a slit into it so I could use the screwdriver to remove it. Link to post Share on other sites
DanHS Posted March 30, 2006 Report Share Posted March 30, 2006 Ugh, this double post thing is really starting to bug me Link to post Share on other sites
bjorn Posted March 30, 2006 Report Share Posted March 30, 2006 Mine is totally stripped ( TM m4) but that doesnt matter - I just use the knife to unscrew and then screw it back in. No problems. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.