BigRedJ Posted August 16, 2006 Report Share Posted August 16, 2006 I've seen a few toipics on what to upgrades, but one big question, what version gearbox bits do i need to get? e.g. a spring guide, V2 or 3? etc what would you guys suggest as must do anr or nice to do etc. Link to post Share on other sites
Eddie182 Posted August 16, 2006 Report Share Posted August 16, 2006 Version 2 mate. Link to post Share on other sites
BigRedJ Posted August 16, 2006 Author Report Share Posted August 16, 2006 Version 2 mate. <{POST_SNAPBACK}> ta, any suggestions on what to do? or justdo the bearings, shim, spring guide? as i understand it the grars are fine until they wear, same for the piston and head? Link to post Share on other sites
SlvrDragon50 Posted August 16, 2006 Report Share Posted August 16, 2006 If you upgrade the spring, get metal bushings and shims Link to post Share on other sites
Melonfish Posted August 16, 2006 Report Share Posted August 16, 2006 okay, slow down. first of all do you know what version your gearbox is? if its a V2 i believe you have nylon bushings so thats the first thing you need to replace. if its a V3 (just bought it new say) then they'll be metal. by version here i mean gun not gearbox. the gearbox is a split V2 gearbox. check which version gun it is, then talk upgrades. pete Link to post Share on other sites
Prolific Posted August 16, 2006 Report Share Posted August 16, 2006 Chances are if you bought it since june of this year its the new type. Link to post Share on other sites
tgrillo Posted August 17, 2006 Report Share Posted August 17, 2006 Replace the piston (the gears are ok on the 06 models, should last a while), piston head, spring guide, spring, and hopup bucking/inner barrel. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.