Italy92FS

I've noticed disassembling the slide that if I press the trigger in DA the striker won't retract all their ride, so the strike is weak on the output valve. I haved some pistols in my life, a KJW M9A1 and a HFC M190 and that won't have the problem.

Fault of what spring? The main spring? In SA there aren't any problem... No one have my same problem?

Socom Gear M9 with original Pachmayr grips and ITI Streamlight underlight mount. Waiting for a SF X400 LAM unit!

Right. Mine have a problem with the double action, the trigger depress all the hammer but the striker won't hit the magazine valve. If I cock the hammer and shot in single action no problem...

Buyed a SOCOM Gear M9 (a WE M9 with markings and threaded barrel with rubberized grips). Parts are 101% compatible with TM and clones, I've swapped the original grips with a Beretta real deal and the standard slide release (the OEM is longer like Tactical Master). Tested it with KJW CO2 Magazines without problems. I've expected the full auto issue only in the final shots of the magazines. I've tested 2 types of gas magazines, the WE OEM and the standard KJW. When you insert the KJW magazine into the magwell, you must do it quickly because the rear output valve in the side of the maga

Absolutly. What do you think about the G&P 6.08 inner barrel with G&P Hop-up Unit (68 dollars) and RA-Tech Red bucking (5 dollars)? If I install a 6.03 or a 6.01 precision barrel (CQB length) I have a dream gun? You think if that receiver plus the complete NPAS Alu group Ra-Tech will handle the CO2 when it will be released? It's a big price to fix and upgrade it (about 700 euros), but I want a definitive GBB-R. Thank you very much.

Thanks, I've heard about the AGM magazine catch requires some filling to fit G&P receiver, did you confirm?

Thanks for the reply. For the buffer tube and the barrel extension no problem, because I've buyed the G&P Multipurpose stock complete with the buffer tube and the G&P complete Hop-up unit complete with inner 6.08 barrel. The threading of the nut for the barrel is the same right? Thanks

Little question: The AGM barrel nut will fit in G&P metal body with 5ku metal barrel? AGM Internals will fit in G&P metal body? Thanks

So my delta ring should be removed? I have the QD latch in front of the launcher...

G&P M203 Short NO-RIS version fits the barrel nut if I remove the lower RIS part?

My KJW M9A1 CO2:

I don't see the thread of the barrel...

They shoots perfectly.The slide catch engages perfectly the slide. As soon as possible I upload a video of shooting. The only "con" is when I put the KJW mags in it,when I rack the slide it remains a bit retracted (1-2mm) of normal level. It disappears with Marui mags. I think tollerances problems with KJW...