jkpics

The threads on the UPR buffer tube are to big, spend about 45 minuts filing them down to fit. The ELEMENT was a lot of small things, the big screw that holds the stock to the buffer tube is to short, and alle the screws in the cheek rest are to long, some other screws are to long. ELEMENT fits better, finish is not quit as good as PTS, but still ok, I think I would recomend the ELEMENT over PTS for WE.

I have installed both ELEMENT and PTS UBR stocks, and non of them fits WE without modding.

Not really, that is how it is designed to work.

TSC makes ######

And the dimaco C7 (M95) I had in the danish national guard lied to me as well? you know what how about you finde a picture of a real gun with that seam, and I am not your buddy, friend.

Hey Guy Look at the front of the mag well in one of the firsts pics, at that price it need to be flawless.

The pin hole does not go all the way thrue, so when you mount the rail there is no where for the pin to go.

I just did one of mine, you onlu need a 5mm pin, 4mm into the resiver and only 1mm into the rail

You finde something to use as a pin, and then you drill a hole for it in the rail and in the resiver, I think I will cut down a 2mm drill bit for the 2 pins I need, the pin only need to be what 10mm long.

I have BOTH the madbull and the china SWS version, and as fare as I can tell there is space on both version to put a 2mm pin in them. Also mounting this rail type on a WE, I have found that the rail hits the dust cover pin, so you will need to cut 1-2mm of the end of that, then the rail mounts flush with the resiver.

I "fixed" my loss novske/SWS rail with a AP mount that extends onto the rail and keeps it in place, but after looking around the interweb I found this http://www.coloradoshooting.org/sws_e1free...at_hanguard.htm looks like we have to drill this badboy and install a pin.

The China CTS stock fits fine.

I placed order no: 15 on airsoft123 and payed to the wrong paypal email address, airsoft123 helped me out fast and fixed the problem, now I am just waiting for the stuff.

If you fill the mag with BB's there is no give left in the spring, it is compressed 100%, when you insert the magasin the nuzzel is forward and and the BB's need to be pushed down for the mag release to engage, with the mag loaded 100% with BB's you have to use force to seat the magasin and run the risk of damaging BB's, I down load my mags so I can make tactical reloads and don't have to worry about damaging BB's or magasins dropping out of the gun.

Thanks they had it and I placed a order.

I can't finde a CO2 conversion kit in stock anyware, anyone know where I can pick one up?

168 posts and you don't know that no BB is really 6mm, 5,95mm is the standart BB size.

When zeroing a sight, you are not moving your point of aim (the dot) you are moving your point of impact, SO put the dot in the center of the target, shoot and then you adjust POI intil POI and POA is the same.

If you hit it with a hammer it will break, airsoft guns are like that.

Nice, might be cool to mess with.

Hej, that is the way the real gun works, deal.

I found that G&P pinion gears are rather week and breaks fast if misaligned, they are also really cheep. And it is normal to destroy pinion gears with no mark on the bevel gear, this says nothing about hardness or anything other then a misaligned motor IMHO.

So here is the WA in it's nativ state http://www.youtube.com/watch?v=BEPeYEHWV-E

Arcording to WE's homepage they made steel moldes for airsoft for 20 years, and the WE M4 is an original design from K1 costums, WE just makes it, AND all of this is happening in Taiwan, nor mainland China, Taiwan have been making airsoft products for many years. SO lets stop with all the clone BS, the WE M4 is not a clone/copy or anything like that. I made this product evolution list for denmark, all steps are nor universeal 1, Gun works. 2, 1 and takes M120 upgrade cheaply. 3, 1, 2 and is made in the same matrial as the RS counterpart. 4, 1, 2, 3 real diamentions, gun is

You will feel more blowback in a lighter gun, what takes more energy to move, 1 or 2 kg?